Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
Givf connectics
Hi at all
I purchase a givf interface XCarlink for fit a WiFi reverse camera...But There IS no sat nav available on the screen..
The dealer say 'in this case fit the givf behind the monitor'but I don't know how make that'
I'm Lost !!! Mayday 😑
Thanks for your response
Philippe
13th Apr 2018 6:56 am
Down&Dirty
Member Since: 17 Aug 2012
Location: Somewhere out back
Posts: 1293
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
Thank's vert much Down and Dirty... So a reverse camera WiFi IS compatible ?
13th Apr 2018 10:34 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Option 1 - Return unit for a refund. And look into the "Range Rover mod".
Not as good as the GVIF but if you have no Sat Nav...... maybe the best option
Need to edit the cars CCF to say it has a reverse camera fitted using an IID (£450)
Option 2 - Need to edit the cars CCF to say it has a Sat Nav fitted using an IID (£450)
Even then I don't know what would happen ?
Plug the GVIF into the displays square connector if no spare connectors under the seat ???
I found my unit needed a CAN connection too which maybe a problem for you without a nav unit.
13th Apr 2018 10:55 am
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
Hi...Pete K...I have a satnav unit under my Seat ...But the trouble IS that i have the inscription on my screen" No satnav avalaible" when i connect the unit givf on the DVD player !!!!
So Maubec directly connect the givf behind the screen ??
Philippe
13th Apr 2018 9:00 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Arh.
Connectors upside down then.
Turn them round and reinsert.
13th Apr 2018 9:59 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
Hi...Thank's for your response...I have turn the connector 180°and No results.....So I try to connect behind the screen...
Bye
14th Apr 2018 6:59 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
kineland wrote:
Thank's vert much Down and Dirty... So a reverse camera WiFi IS compatible ?
Why do you want a wifi camera?- the hole purpose of a gvif is to hard wire the camera(s). Fitting the gvif behind the monitor in not needed.
Check the cable from the satnav to the gvif is fitted correct. Have you got the dip switch correct for LR?- it needs to be down.It can when others can't,
It will when others won't,
It goes where others don't.
14th Apr 2018 7:14 am
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
hi
Avez-vous l'interrupteur DIP correct pour LR? - il doit être en panne. c est quoi comme interrupteur?
il se connecte sur le givf?
MERCI
14th Apr 2018 7:50 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
both the connector to the navigation and gvif need to be the correct way round.
There are 4 combinations! You have to have the correct combination for the Nav to work!
If you get the camera working first it is a bit easier
14th Apr 2018 9:43 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
Dip 5 off/up, the car must sleep and switched on for changes to work.
Le voiture dios dorm et commence pour les changes fonctionner.
It can when others can't,
It will when others won't,
It goes where others don't.
14th Apr 2018 12:44 pm
jbn
Member Since: 06 Jun 2017
Location: Hesse
Posts: 47
Philippe,
Deux questions: avant vos essais d'installer le GVIF aviez vous la navigation? (Qui ne marche plus avec le GVIF?) Et c'est quel caméra que vous avez installé - il se connecte comment?
(Two questions: before you installed the GVIF did you have navigation? (that doesn't work any more WITH the GVIF?) And what camera have you installed - how is it connected?)
14th Apr 2018 5:35 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
Hi at all...
Thank for your response....
The nav is ok...but when i connect givf there is' no sat nav available 'on my screen or a white screen or my nav screen normal! accordind to the position of the connectic in the givf unit
The fact that the cam is wifi don't cause any problem?
Thank's
14th Apr 2018 8:01 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
well if you can get the nav display routed through the GVIF that is good
14th Apr 2018 8:57 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
hi Pete
ok but when i put reverse gear nothing on my screen ...only the normal nav screen...i trie to return the connectic 180° but nothing either normal sat nav or no nav available
perhaps the wifi cam?
thank's
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
