Member Since: 24 Oct 2017
Location: Midlands
Posts: 106
Lost communication with all terrain module...help?!
Hi all,
A kind chap on here lent me use of his fault reader this morning as I’ve got an error on the dash of “special programmes not available” (or something like that) which means I can’t select the terrain response options. Tried to clear faults but still coming up.
Could someone please look at the fault codes below and possibly point me in the right direction?
The main one seems to be “lost communication with all terrain module”...?
Just on a off chance, does anyone else know what’s going on with the passenger door fault (which doesn’t unlock), and the restraint system? (I’ve got a yellow airbag light on the dash)? Are they both just ground related?
Cheers in advance!!
L319 - Discovery 4 2011
Vehicle scanned on 16-06-2018 09:17
Using IIDTool BT V3.0 B2481
BCM-Body Control
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:02 at 92906 mi )
IPC-Instrument Pack
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:03 at 92906 mi )
PCM-Engine SDV6
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:04 at 92906 mi )
RCM-Airbag
B00D5-14 (AF) Restraint system passenger disable indicator - General electrical failure - circuit short to ground or open
( on 16-06-2018 09:17:11 at 92906 mi )
RLM-Suspension
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:08 at 92906 mi )
TCCM-Transfer Case
P1804-00 (2F) Four-wheel drive high indicator circuit failure
( on 16-06-2018 09:17:11 at 92906 mi )
P1808-00 (2F) 4-wheel drive low indicator - circuit failure
( on 16-06-2018 09:17:11 at 92906 mi )
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:11 at 92906 mi )
TCM-Transmission 6spd
U0138-00 (2F) Lost communication with all terrain control module
( on 16-06-2018 09:17:12 at 92906 mi )
****UPDATE****
Nvm - all sorted. As it turns out, the fuse in socket 22 wasn’t pushed all the way in!!!
All errors now gone!1964 SIIA - Gone but not forgotten
1971 Range Rover Hybrid - Sold to a braver man than I
1987 Defender 90 - Written off
1990 Range Rover Classic - Rusted to bits/death trap
2010 Discovery 4 - Current WIP
16th Jun 2018 9:21 am
Mattt
Member Since: 19 Jul 2012
Location: Lincolnshire
Posts: 97
16th Jun 2018 5:17 pm
galwaygreen
Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
that's lucky
16th Jun 2018 8:22 pm
Klaus06
Member Since: 15 Oct 2023
Location: Leicester
Posts: 2
Hello there I have same issue where is this fuse located ??
15th Oct 2023 7:48 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 401
...On pages 312 and 313 of the manual?
Click image to enlarge
Click image to enlarge
The fuse mentioned above is fifth from the bottom on the right side of the engine compartment fuse box.Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
16th Oct 2023 6:36 am
Klaus06
Member Since: 15 Oct 2023
Location: Leicester
Posts: 2
Thanks you I also want to ask if you had the same issue were the transfer case control module didn’t have power cause that’s what I have as I check with the multimeter
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
