Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
  
|
Hi all, I'm having problems with a Thetford c250 toilet.
The full level LED if flashing all the time.
I've checked the float switch in the waste tank( grey with orange handles) and all seems ok.
Led flashes with the waste tank in or out.
Held a magnet up against the reed switch pcb and the LED goes out.
So can anyone confirm if the LED flashes when they take out the waste holding tank Or just when it's full.
I'm thinking I've got a problem with the waste tank?
Cheers
|
 27th Oct 2018 6:01 pm |
|
|
nigel207
Member Since: 26 Mar 2009
Location: Nottinghamshire
Posts: 1359
|
The LED should be on permanently when the tank is full I believe, and flashes if the tank isn’t properly inserted.
|
| 27th Oct 2018 6:07 pm |
|
|
Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
|
Thinking the magnet has fallen off the end of the float arm so it thinks the cassette isn't pushed in.
|
| 27th Oct 2018 6:12 pm |
|
|
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
|
Go on line there are topics about this and how to repair from memory Thetfoird do a repair kit but would have to search for post MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
| 27th Oct 2018 7:49 pm |
|
|
Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
|
Thanks for the info everybody. 
Problem found in the end, the reed switch leg had fractured where it is soldered onto the pcb.
Re soldered it and all working fine now.
|
| 30th Oct 2018 8:03 pm |
|
|
