Woody294
Member Since: 23 Dec 2018
Location: Herefordshire
Posts: 3
|
LR3 Adding Cruise control |
|
I realise there's a few threads on here about this already but I didn't want to resurrect one. I've added the cruise control switch pack but it must not be enabled in the config
Anyone near Herefordshire that can do it? Really can't afford to be splashing out on the diagnostics kit right now.
Also, Hello!
|
23rd Dec 2018 5:29 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1807
|
do you only need the switch pack or are there other bits required
|
24th Dec 2018 8:56 am |
|
|
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
|
Just the switches and then as above it needs to be enabled using something like an IID tool. Some times the cruise control works straight away after fitting the switches.
|
24th Dec 2018 8:58 am |
|
|
Woody294
Member Since: 23 Dec 2018
Location: Herefordshire
Posts: 3
|
Yeah I was hoping it would just work but no, guess I need the kit to enable it.
|
24th Dec 2018 11:45 am |
|
|
Yabba
Member Since: 23 Aug 2016
Location: Laakdal
Posts: 15
|
I recently put the steering wheel buttons in my SE without cc, changed the necessary settings in the vehicle files and guess what, it didn't work... Then after 2 days, and not doing anything to it, it started working anyway. Strange things...
|
24th Jan 2019 7:46 pm |
|
|
Woody294
Member Since: 23 Dec 2018
Location: Herefordshire
Posts: 3
|
What equipment did you use to change the files?
|
25th Jan 2019 11:40 am |
|
|
Yabba
Member Since: 23 Aug 2016
Location: Laakdal
Posts: 15
|
Nanocom
|
25th Jan 2019 11:52 am |
|
|