| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 806
  
|
hi everyone,does anyone know if the cruise control buttons can be taken apart to clean them as my buttons wont operate the iid tool and im getting a bit twitchy knowing its not working or should I just buy new ones and hope that's the problem thanks and merry christmas please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
 24th Dec 2018 4:47 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
 
|
Sure it’s not the clock spring ?
More likely if no buttons work
|
| 24th Dec 2018 5:09 pm |
|
|
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 806
|
 sometimes the cruise works but you cant turn off have to press brake pedal,other times you can increase speed but cant reduce then you can reduce but not increase,then wont work going to work but will work coming home and as my iid tool is the base one that uses the cruise buttons it getting difficult to use and if you press repeatedly it just flips and no longer wants to play at all
done a bit of reading this afternoon and seems to be a switch problem rather than a clock spring hopefully,so im going to strip and clean over chrimbo see if that does any good  please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
| 24th Dec 2018 6:29 pm |
|
|
DiscoNels
Member Since: 14 May 2013
Location: Minneapolis, Minnesota
Posts: 334
 
|
@eightfoot, did you ever get to the bottom of your problem and find a working solution?
I'm having similar issues with my cruise buttons not working on a random basis. 1998 Discovery LSE - Gold, 249,000+ miles, completely stock
2007 Range Rover SC - White, 63,000 mi
2006 Discovery 3 HSE - Locking E-Diff, Rover Specialties rock sliders, 275/65/18 Cooper STT PRO, LLAMS suspension controller, LR Expedition Roof Rack. Asfir Rear Diff, Tactical 4x4 (Gas Tank Skid, Rear Bumper, and Front Bumper w/12K winch), Traxide Split Charge System, Overland Solar + Lensun Solar panels
BBS Nanocom Evolution and Gap Diagnostics IID BT Tool
|
| 19th Aug 2019 2:55 pm |
|
|
DN
D3 Decade
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2345
 
|
I had random situations when the cruise set button did not work, then it would etc.....In my case it turned out not to be the switches or clock spring at fault. It was poor connections in the wiring to the switches. Just unclipped and moved the airbag aside, and disconnected and reconnected the wiring connections a few times, put airbag back in position, tried it, and cruise then worked when selected, and has done ever since. Not saying that yours is this, but worth a try, and cost nothing.  D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 19th Aug 2019 7:24 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
