Member Since: 15 Jul 2005
Location: Middleton, Manchester
Posts: 1084
I need these... We striped the thread on one of mine in Wales, so could do with a replacement. Though probably I'll watch the price as I don't want all that lot if the cost goes up to high. Anyone know how much they cost each from LR? Coffeecup
March 2005 TDV6 S - Tonga Green - Manual May 2008 TDV6 SE - Stornoway Grey - Auto
Dec 2010 SDV6 XS - Galway Green - Auto
£1.76 each supposedly, though that may be out of date
Part number for VINs up to 5A303208 is RRD500041 (black ones at a guess)
Part number for VINs from 5A303209 is RRD500042 (silver ones?)The End
6th Nov 2005 11:29 pm
Coffeecup
Member Since: 15 Jul 2005
Location: Middleton, Manchester
Posts: 1084
Thanks for that info.
That should dampen my enthusiasm for bidding too high, as I don't intend to make a habit of having my threads crossed Coffeecup
March 2005 TDV6 S - Tonga Green - Manual May 2008 TDV6 SE - Stornoway Grey - Auto
Dec 2010 SDV6 XS - Galway Green - Auto
6th Nov 2005 11:32 pm
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Coffeecup wrote:
I need these... We striped the thread on one of mine in Wales, so could do with a replacement. Though probably I'll watch the price as I don't want all that lot if the cost goes up to high. Anyone know how much they cost each from LR?
How on earth did you strip a thread CC? which gorilla tightened up the nut??
7th Nov 2005 8:37 am
Coffeecup
Member Since: 15 Jul 2005
Location: Middleton, Manchester
Posts: 1084
BN wrote:
How on earth did you strip a thread CC? which gorilla tightened up the nut??
It was cross threaded in the rush to get the nuts back on before the vehicle re-leveled itself and came off the jack. The person in question who was doing his utmost to help was the second section guide. Coffeecup
March 2005 TDV6 S - Tonga Green - Manual May 2008 TDV6 SE - Stornoway Grey - Auto
Dec 2010 SDV6 XS - Galway Green - Auto
7th Nov 2005 8:49 am
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Coffeecup wrote:
BN wrote:
How on earth did you strip a thread CC? which gorilla tightened up the nut??
It was cross threaded in the rush to get the nuts back on before the vehicle re-leveled itself and came off the jack. The person in question who was doing his utmost to help was the second section guide.
Oh dear got 4 on and stuffed the 5th, I will take the Michael out of him when I see him later today
Luckily I'd given CC 4 extra ones along with the 17" wheel/tyre earlier in the day so he had a spare, did mean that along with his odd wheel he had an odd silver wheel nut too though!The End
7th Nov 2005 9:19 am
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Slimer wrote:
Luckily I'd given CC 4 extra ones along with the 17" wheel/tyre earlier in the day so he had a spare, did mean that along with his odd wheel he had an odd silver wheel nut too though!
There is no answer to that is there
7th Nov 2005 9:21 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Don't get at the person involved, it seemed to be very easy to do, especially in the circumstances.
I was right next to him and the nuts were a pain to get on, especially with the limited room afforded by the poxy jack.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
7th Nov 2005 10:26 am
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Martin wrote:
Don't get at the person involved, it seemed to be very easy to do, especially in the circumstances.
I was right next to him and the nuts were a pain to get on, especially with the limited room afforded by the poxy jack.
Don't worry, the person concerned is a good guy and he did his best we all know that. Lets face it he is the first to help as always, remember the RR on its roof, he was first there. Still take the micky out of him, his wife does.
7th Nov 2005 10:32 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
By the way, I had to change a front tyre on mine last night, and I tried the trick of raising to off-road, placing the jack under the chassis, then lowering to access height. The wheel lifted about 4 inches of the ground without me having to break into a sweat winding the poxy jack
The only problem was that the car thought it was beached, and kept fighting to go into extended mode - as CC found in the above incident. However, I also found out last night that simply opening the drivers door whilst you change the wheel keeps it in access height
We were under a lot of pressure to get off that lane before darkness fell, so I think our leader is fully exonerated for cross threading the nut.
7th Nov 2005 8:00 pm
Coffeecup
Member Since: 15 Jul 2005
Location: Middleton, Manchester
Posts: 1084
Excellent snippet of info there Gareth about opening the door. It was a real pain in Wales as it reset every 2 seconds and I felt a awful sat in my D3 while everyone else was outside it working hard to fix it (the help offered and given was very welcome and something I am most greatful for). Coffeecup
March 2005 TDV6 S - Tonga Green - Manual May 2008 TDV6 SE - Stornoway Grey - Auto
Dec 2010 SDV6 XS - Galway Green - Auto
7th Nov 2005 10:18 pm
Dom Harvey Lord of the Four Fingers
Member Since: 15 Apr 2005
Location: Dorset
Posts: 7460
That should be 'Tyreless Mudlark', surely coffeecup 2004 Discovery 3 - gone
2006 Discovery 3 - gone
2008 Discovery 3 GS - gone
2011 Freelander LE Special Edition - gone
2007 Discovery 3 XS - gone
2012 Discovery 4 GS - gone
2019 RangeRover Evoque 2.00 D150 R-Dynamic
7th Nov 2005 10:21 pm
Coffeecup
Member Since: 15 Jul 2005
Location: Middleton, Manchester
Posts: 1084
Dom Harvey wrote:
That should be 'Tyreless Mudlark', surely coffeecup
I can't keep updating my monica each time Coffeecup
March 2005 TDV6 S - Tonga Green - Manual May 2008 TDV6 SE - Stornoway Grey - Auto
Dec 2010 SDV6 XS - Galway Green - Auto
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum