| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
cammers
Member Since: 22 Jun 2012
Location: Kent
Posts: 33
  
|
Having sold my D3 a few years ago due to a house move, I have just this week bought another Discovery, this time a 2010 D4 HSE.
I am very happy with the car, but have found a couple of issues, which I didnt initially notice, but would like to put right with a bit of advice.
The side mirrors will not fold or unfold, neither by locking the car or by pressing the 2 buttons.
I believe that by pressing the 2 buttons for the 2 mirrors together, the LEDs on the buttons should both light up, but they don't.
I can adjust the mirrors ok, but they just dont fold.
Also, the rear windows can only be operated from the front.
The disable button, whether on or off, seems to make no difference.
Could these issues be related?
Any help much appreciated.
Mark
|
 16th Aug 2019 1:10 am |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
 
|
How can you be so certain your car is equipped with power folding mirrors?
They don't all have them, which might explain why you're struggling to get them to fold.  Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 16th Aug 2019 2:10 am |
|
|
RogB
Member Since: 15 Jun 2018
Location: Mansfield
Posts: 1730
|
HSE came as standard with folding mirrors so they should work as described.
im just guessing but could the window switch module be faulty as the rear windows only work from the drivers position as well as the mirrors not folding?
the other option that used to work on Freelander2 was to lock the car from outside using the key fob, then manually fold the mirrors in (takes a bit of force to do it). Then when you unlock the car again the mirrors should fold out/in on the key press.
Have you had the codes read to see if that brings anything up ?
|
| 16th Aug 2019 8:21 am |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1670
 
|
Do the mirrors dip when you reverse? Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 16th Aug 2019 8:24 am |
|
|
cammers
Member Since: 22 Jun 2012
Location: Kent
Posts: 33
|
I am by no means certain that it is equipped with folding mirrors, but assumed that being an HSE, it would be. It also shows the little symbol under the 2 buttons.
I have tried different combinations of locking, manually folding, unlocking etc, but to no avail.
I haven't had chance to get any fault codes read yet.
The mirrors do dip when reversing though.
Thanks
|
| 16th Aug 2019 8:38 am |
|
|
Pedros
Member Since: 25 Jun 2011
Location: Cumbria
Posts: 454
|
Well I've got a 2010 XS and that has folding mirrors, so the HSE oughta!
|
| 17th Aug 2019 11:29 pm |
|
|
Washwipe
Member Since: 19 Apr 2013
Location: Bucks Oxon Herts Border
Posts: 3169
|
Pressing the two buttons together and holding them down should fold the mirrors in, pressing and holding again folds them out. Rear most button isolates the rears giving you complete control of the rears.
Suspect the switch pack may be the issue.
|
| 18th Aug 2019 8:21 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
|
Take the drivers door card off and check the wiring plugs and sockets, if there is a poor connection the faults can be related, whilst in there check the number of wires going to the mirrors, ISTR folding mirrors have 5 wires none folding 3, mirrors get damaged easily and folding mirrors are expensive to replace they may have been replaced with none folding  It can when others can't,
It will when others won't,
It goes where others don't.
|
| 18th Aug 2019 9:41 am |
|
|
cammers
Member Since: 22 Jun 2012
Location: Kent
Posts: 33
|
Thanks for the suggestions.
I will give everything a go and let you know how I get on.
I have acquired a switch unit, so I'll try that first.
Thanks
|
| 18th Aug 2019 12:00 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
