Ozd3er
Member Since: 08 Dec 2006
Location: Moss Vale
Posts: 12
  
|
| Two extra cameras to fit. |
|
Hi all,
I need to connect two cameras from my horse float and I want to run it through the car’s existing monitor.
I have a 2015 SDV6 HSE but don’t have the surround cameras.
Any suggestions would be appreciated as always
Thanks,
Dale
|
 21st Oct 2019 11:12 pm |
|
|
betty02
Member Since: 09 Jun 2014
Location: Wakefield
Posts: 133
|
This got floated around recently. Not fully sure it is what you're after but it may work. Think it allows multiple inputs to the 1 screen.
Someone else maybe better to confirm -
https://www.hids4u.co.uk/land-rover-discov...nitor.html
Search this forum for GVIF might give more details 
|
| 22nd Oct 2019 7:05 am |
|
|
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
|
When you say two cameras do you want to view both at the same time or switch between them?
If you want to switch between them have a read of this https://www.aulro.com/afvb/l319-discovery-...creen.html especially the PDF attachment in post #10 by ‘Nod’ which gives very good instructions and an example of how to switch multiple cameras.
I have used those instructions to fit a single camera to the rear of my camper trailer, and it works a treat. The important thing is that you get a NTSC camera I got mine from this seller https://www.ebay.com.au/itm/4-PIN-Heavy-Du...2409115778 but you must specify in the notes that you actually want a NTSC camera, otherwise they send you a PAL camera as ‘That’s what most people actually want’.
You can get PAL to NTSC converters, but I have no experience with them and a D4. MY14 TDV6
|
| 22nd Oct 2019 11:06 am |
|
|
Ozd3er
Member Since: 08 Dec 2006
Location: Moss Vale
Posts: 12
|
Thanks for the replies.
I think that I will have a talk to the auto electrician and see what he says.
Dale
|
| 22nd Oct 2019 10:31 pm |
|
|
