Browny90
Member Since: 19 Jul 2016
Location: Ashbourne
Posts: 698
  
|
| Enter service mode on a FFRR without IID licence |
|
Morning all,
I reluctantly offered to change the rear pads on my neighbours FFRR, is has the electronic module on the caliper itself.
I connected my Gap BT IID, it will read and clear the faults and it has the option to 'enter service mode' for the EPB. When I select this, the ignition goes off and on again, but then says 'operation failed E3'.
Should this work or will it need a licence? He's happy to pay for a licence and I'm happy for him to have one, but only if it needs it.
Should this function work without a licence?
I did read that you can do it with a manual combination of putting the epb brake off and hold the throttle etc, but I could get this to work.
Thanks in advance,
Browny Disco4 MY16 SDV6 Landmark Black
Disco4 MY12 SDV6 XS Orkney Grey (Gone)
Defender 90 200tdi Completely rebuilt.
|
 5th Mar 2020 11:02 am |
|
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
  
|
what's maintenance mode ?
does it allow you more slack on the cables ?
or just stop it suddenly applying ?
|
| 5th Mar 2020 6:41 pm |
|
|
|
|
