Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Wiring | pin-out high-line 2
I am looking for a wiring plan /pin-out on the amp in my motor, in the workshop manual for the D3 here in the wiki forum, I can only find wiring plans / schematics For the low-line and the logic7 High-line?
Not the system I have? Or do I miss the point?
In my ‘05 (MY06) D3 I have the High line system 2 (mid-line) with 6CD changer - external amplifier (MOST connection) Under the seat.
So:
Two front door mounted mid/bass range speakers (one per side).
Two front door mounted tweeters (one per side).
Two rear door mounted mid/bass range speakers (one per side).
Two rear door mounted tweeters (one per side).
A sub-woofer located in the lower tailgate.
Since in this system each door has one channel with 2 speakers (1 tweeter & 1 mid-range/woofer)
Both fed by the same channel
So 4 channels + the sub woofer in the tail door makes 5 channels?
On the amp, there are 6 output channels.. or at least 6 out-put wires. g/gw
Where is the 6th used for?
Is that one going to the Centre speaker location? (Where no Centre speaker is of-course in this case)
And are the two “missing” channels, the one’s for the D-pillars? (Although they themselves seems to be (partially) pre wired in the back...
Schematics of the D4 are all different.. but who has the proper one for the earlyer high-line 2 system?
And knows the pin-out on the amp?
Any help would be appreciatedBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
Last edited by Motolab on 27th Apr 2020 10:15 pm. Edited 2 times in total
27th Apr 2020 8:23 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
It’s 4 wires for the sub
Stereo sub
27th Apr 2020 8:35 pm
pwheeldon
Member Since: 14 Jan 2020
Location: West Yorks
Posts: 1505
I dont know what the others do, but the green and white ones are the speakers. I bought the Connects2 bypass loom, see link below. This kit only uses the power connector and the green wire connector to bypass the amp and all the speakers work. I didn't know there was a sub in boot. I would be interested to know what the others are, other than the Most connector.
https://www.ebay.co.uk/itm/161702961436Discovery 4 GS 2009 Auto Stornoway Grey
Discovery 3 s 2005 Auto Bonatti Grey Gone
Discovery 3 SE 2005 Manual Zambezi Silver Gone
Range Rover Sport HSE 2006 Black
Aston Martin DB7 VV
27th Apr 2020 8:45 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Re: Wiring | pin-out high-line 2
Motolab wrote:
I am looking for a wiring plan /pin-out on the amp in my motor, in the workshop manual for the D3 here in the wiki forum, I can only find wiring plans / schematics For the low-line and the logic7 High-line?
Not the system I have? Or do I miss the point?
In my ‘05 (MY06) D3 I have the High line system 2 (mid-line) with 6CD changer - external amplifier (MOST connection) Under the seat.
So:
Two front door mounted mid/bass range speakers (one per side).
Two front door mounted tweeters (one per side).
Two rear door mounted mid/bass range speakers (one per side).
Two rear door mounted tweeters (one per side).
A sub-woofer located in the lower tailgate.
Since in this system each door has one channel with 2 speakers (1 tweeter & 1 mid-range/woofer)
Both fed by the same channel
So 4 channels + the sub woofer in the tail door makes 5 channels?
On the amp, there are 6 output channels.. or at least 6 out-put wires. g/gw
Where is the 6th used for?
Is that one going to the Centre speaker location? (Where no Centre speaker is of-course in this case)
And are the two “missing” channels, the one’s for the D-pillars? (Although they themselves seems to be (partially) pre wired in the back...
Schematics of the D4 are all different.. but who has the proper one for the earlyer high-line 2 system?
And knows the pin-out on the amp?
Any help would be appreciated
Hi
Found the following which I hope helps u
Looks as though ur system has the sub woofer in the tailgate
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Also this, know it’s from the RRS and amp is in the wrong place , but it was just on the off chance if the connectors may be the same and of use to u
Hope it helps
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
27th Apr 2020 11:44 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Pete K wrote:
It’s 4 wires for the sub
Stereo sub
Well, that will explain the one extra... thnx..
Rather strange the passive sub uses 2 channels? but the HK is quite sophisticated and well engineered stuff, so it will make sense somehow..
Note: I do not want or intend to change / replace the amp, just want to know what the pin-out is...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
28th Apr 2020 5:19 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
Oddly it’s the normal way.
28th Apr 2020 5:55 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Motolab wrote:
Pete K wrote:
It’s 4 wires for the sub
Stereo sub
Well, that will explain the one extra... thnx..
Rather strange the passive sub uses 2 channels? but the HK is quite sophisticated and well engineered stuff, so it will make sense somehow..
Note: I do not want or intend to change / replace the amp, just want to know what the pin-out is...
Hi
Hope the info helped and find what ur looking for
28th Apr 2020 4:21 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
@gstuart
Thanks for your effort......
The pin output like on this picture was what I was looking for..
But, please read what I asked for otherwise..
(I don’t wan t to be rude) I did know Allready what I have regarding amp and speakers.. 8)
Regarding the schematics for wiring IN the cabin/motor I need it exactly for my motor... D3 build in ‘05 MY’06 specs..
All the schematics in the books you sent and I allready had...(although overseen the pinout, so thanks again ) are different, but none is exactly the same as in my motor..specific different on the cable/wiring loom
This one looks like it, but misses the sub-woofer.... Why?
The other one in the manuals is the logic7..
The reason I Did like to know the schematics... of exact my type/model...was in the first place : the D-pillar is pre-wired for the additional rear speakers... but not wired @/in the LS amp connector.... so where does it “stop/start” ?
Since the RSS has another amp location, the exact wiring layout but more location is also different..
So does not help sufficient..
Anyway.... I think I know enough now.. I have planned to add the logic7 type speakers to my HK Hi line 2 amp.. they are good sounding amps by themselves...
why? Just because of the better quality of the speakers themselves....(material and bigger magnets) i do not want to replace them With aftermarket stuff..
Since a piece of wiring is missing in my motor, it is easier to use the existing wiring and maybe additional filter for the low range door speakers... To make it 3 way in the front doors
Or...... fit an extra amp ( I have a few audisons left somewhere) fed by 2 speaker output channels and wire them separate to the front door to power the high and mid tone speakers with filters, the woofer to be fed from the HK. So the power Is more equally devided (3 speakers on one channel on the standard system is maybe a little bit too much..)Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
Last edited by Motolab on 28th Apr 2020 5:56 pm. Edited 1 time in total
28th Apr 2020 4:48 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Hi @motolab
Ur very welcome and not rude in the least , just thought if I put all the details in the there at least u have it on the off chance
Hope u get it all sorted out and isn’t too much of a nightmare
Stay safe and well
28th Apr 2020 5:20 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
The sub woof circuit is on a Separate page
They can’t get all speakers on one page
28th Apr 2020 7:12 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I was thinking you were correct for a second
