Member Since: 08 Mar 2016
Location: Baku
Posts: 26
[Wanted] Dog guard fitting kit.
Hello dear members. I am looking for fitting kit of genuine LR full height dog guard. The new one is so expensive. Maybe someone has full kit.
Many thanks.
Best Regards, Fuad.
28th May 2020 5:53 am
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
It really depends on how much (or how little) of the fitting kit you have? I know a few people on here have made their own floor brackets but the rest of the parts would be pretty hard to replicate. They do occasionally come up on eBay for around £30-£40
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
28th May 2020 6:23 am
Hot Tub
Member Since: 15 Aug 2017
Location: Milton Keynes
Posts: 1071
Worth fitting an emergency tail gate release as with full height dog guard and tail gate release plays up very difficult to remove Trust me been there got the T shirt recently took angle grinder to remove most of the mesh on drivers side so can squeeze through
Should be able to make up own parts nothing that special.Welsh Collie Chauffeur Service To Barney & Rooney.
28th May 2020 9:30 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14417
Any use?D4 HSE EU6 (Known as Jeeves)
New Defender L663 110 SE (known as Noddy!) Sold
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
Worth fitting an emergency tail gate release as with full height dog guard and tail gate release plays up very difficult to remove
How please does one do this? I have searched but not found anything, although there are LOTS of topice on "failure".
TIA
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
28th May 2020 11:12 am
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2892
I have a kit if you want me to measure and send you the measurements as you can probably have one made up locally for a lot less than the cost of purchasing and shipping a KitMust stop buying shiny toys....
28th May 2020 11:14 am
Fuad
Member Since: 08 Mar 2016
Location: Baku
Posts: 26
Thank you all for yours replies. I bought it on eBay, but seller hadn't indicated that it didn't have any fitting matterials. Thank you but I am not sure that even if I have their measures, the local foremen will be able to make their replicas. I found new genuine kit for 100$, but it's expensive too.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
recently took angle grinder to remove most of the mesh on drivers side so can squeeze through 
