Should be a great Higher spec camera so mounted it, turned it on and....
This picture was taken on permanent power after contact But, when i took the Current from the reverse light gives the same picture, but even less colour, more black and white ish, flickering with the colours you see here..
Does the early D4 screen, need PAL or NTSC camera? In the hidden menu i see it has „selected“ PAL with no option the change it manually..
Someone Any ideas?
Who has done this mod, with what type of camera?Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
Last edited by Motolab on 9th Jul 2020 11:09 pm. Edited 1 time in total
9th Jul 2020 8:37 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
My eBay camera that worked on the D3 screen worked fine with the D4 display.
The camera + signal went to the bottom pin on display connector ?
removed
Last edited by Pete K on 10th Jul 2020 6:54 am. Edited 1 time in total
9th Jul 2020 9:21 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
I do use the correct pin out... i have changed it, for test, but is correct..
I think is have a NTSC, thought i did read here on the forum i needed that, but as said... i see PAL in the hidden menu...
Pete, do you know what type you have, or what you see in the menu?Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
9th Jul 2020 10:41 pm
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
I have a MY14 with factory fitted reverse camera. I fitted a camera to the rear of my camper trailer and wired it to display on the D4 screen. This camera had to be a NTSC one, I originally tried it with a PAL camera but got a similar picture to your video.MY14 TDV6
9th Jul 2020 10:46 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Ok.. interesting...... but a MY14 has a different display unit than the D4 screens we use in the D3...
In the D3 we use the early D4 screens my09 my10Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
9th Jul 2020 11:03 pm
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
The camera you linked to on Amazon indicates in the listing that it is a NTSC camera. If you want a PAL camera you have to "leave a message". Did you request a PAL version?MY14 TDV6
9th Jul 2020 11:11 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
And that is why i ordered the NTSC type....
But as said it does not work in /on my screen it seems...
Before buying another one, i like to know a little bit more now... they are not for free
Do these early D4 screens “detect” a certain type of camera maybe. And did i get a PAL instead of a NTSC?
On the camera it self i see read nothing..
I have another cheaper camera, NTSC also i used to think, giving the same kind of image..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
10th Jul 2020 7:08 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
On my D4 display the PAL (video format) and WIDE soft buttons do not change the image at all. (they did on the D3). So this is worth noting.
As you have tried 2 camera's, you could either :
1) refit the old display and see if the camera works on the test page. If not, press the PAL button and then see if it works.
2) connect the camera into the other 2 inputs (to rule out a display problem) e.g the TV and accessory camera pins. Then go into the test page, and see if the camera works on the other inputs.
(please let me know which pins are TC etc) (i'm assuming + is always on the bottom)
Maybe the camera is too good for the display. e.g HD.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
