Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 307
sholacivileng@yahoo.es wrote:
thisandy wrote:
I am referring to these knobs on the android unit.
Hi Sandy, I've got a 2016 Land Rover Discovery4 HSE luxury. My software is Bosch. Do you by any chance know anyone in the UK who can help me install the tesla style unit? Also do you know if the steering controls will still work?. Cheers
This unit replaces the entire existing unit and integrates with the fiber optic system.It is suitable for your vehicle.I have fitted these and they work well.You will loose the Land Rover 4 x 4 info but it’s replaced in a different format.Steering wheel controls are retained and configurable.As I mentioned in previous posts I don’t fit for profit.
30th Dec 2023 4:51 pm
Guppy
Member Since: 24 Jan 2011
Location: Victoria
Posts: 8
Hi Andy,
Greetings from Down Under
I purchased one of these (with knobs) from AliExpress. All working well but can’t find any info on utilising the HK7 or rear entertainment screens
As you said _instructions are non existent and even communication is answered by an AI translation.
The unit I got didn’t require any mods - all cabling was supplied including the MOST.
Any tips for what connections can be used for the HK7?
I think I can use the video out rca’s to connect to the rear ent. But again interested to hear your thoughts
A couple of before/after shots added
Thanks
Gup
D4 HSE MY11 SDV6: Electronic Rear Diff, ARB Bar, Warn Winch, IPF HID Lights, GME UHF, Safari Snorkel, LLAMS, Compmotive 18" Rims with Cooper Zeon LTZ, Kaymar Rear Bar, Mitch Hitch, Long Ranger Axillary tank, ARB Compressor
13th Feb 2024 10:58 am
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 343
That looks awsome 👍had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
13th Feb 2024 2:25 pm
thisandy
Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 307
Guppy wrote:
Hi Andy,
Greetings from Down Under
I purchased one of these (with knobs) from AliExpress. All working well but can’t find any info on utilising the HK7 or rear entertainment screens
As you said _instructions are non existent and even communication is answered by an AI translation.
The unit I got didn’t require any mods - all cabling was supplied including the MOST.
Any tips for what connections can be used for the HK7?
I think I can use the video out rca’s to connect to the rear ent. But again interested to hear your thoughts
A couple of before/after shots added
Thanks
Gup
Looks great well done.If you have sound then you are already integrated into the HK 7 logic amplifier and you may need to tweak it with the new equaliser. As for the rse you have lots of spare outputs but it will need some work to figure it out.My rse was retro fit so it was easy.
13th Feb 2024 6:24 pm
Guppy
Member Since: 24 Jan 2011
Location: Victoria
Posts: 8
Thanks Andy,
The audio was part of the harness which included the MOST, power and CANBUS. Which went from the CD power (and upper fibre optic - cd fibre optic was looped).
Would there be any difference connecting the rca into the rca harness that was supplied?
Also I assume since the amp is active that the sub (HKL)7 is also and no additional wiring is required?
[img]https://www.disco3.co.uk/gallery/albums/userpics/23919/Wiring_2~0.jpeg[/img]D4 HSE MY11 SDV6: Electronic Rear Diff, ARB Bar, Warn Winch, IPF HID Lights, GME UHF, Safari Snorkel, LLAMS, Compmotive 18" Rims with Cooper Zeon LTZ, Kaymar Rear Bar, Mitch Hitch, Long Ranger Axillary tank, ARB Compressor
13th Feb 2024 10:09 pm
SmurfN
Member Since: 07 Nov 2023
Location: Oslo
Posts: 16
I would appreciate to see a short real life video of working the menus, new 4x4 screen, spotify/apps just to get a feel for the menus and unit if anybody could do this.
14th Feb 2024 11:48 am
thisandy
Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 307
Go to YouTube and search Land Rover Tesla style octo core,hours of fun
14th Feb 2024 7:31 pm
thisandy
Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 307
Guppy wrote:
Thanks Andy,
The audio was part of the harness which included the MOST, power and CANBUS. Which went from the CD power (and upper fibre optic - cd fibre optic was looped).
Would there be any difference connecting the rca into the rca harness that was supplied?
Also I assume since the amp is active that the sub (HKL)7 is also and no additional wiring is required?
Mine was plug and play with no additional wiring needed
14th Feb 2024 7:33 pm
thisandy
Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 307
SmurfN wrote:
I would appreciate to see a short real life video of working the menus, new 4x4 screen, spotify/apps just to get a feel for the menus and unit if anybody could do this.
Search on YouTube for Sc7862 video guides,lots of helpful videos about menus for the Tesla style android
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
