Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
I can put in a bid if you're worried about having to make the trip but I think it will be too high for me with the cats in the back as well.. I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
19th Aug 2020 8:25 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
I had been pricing up a spare 22mm socket, a 3/8th to 1/4 inch adaptor, and cutting the handle off a screwdriver with a 1/4 drive that's lost the magnet, welding (or gluing it) all together so it sticks up through the floor and into the boot... might end up costing me a tenner (will keep an old 1/4 drive socket in the rear cubby) but won't look as pretty as your solution
If you could take a photo of the workings of your neat little gadget I'd be very grateful I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
19th Aug 2020 8:33 pm
pwheeldon
Member Since: 14 Jan 2020
Location: West Yorks
Posts: 1505
I think ill have to just make one of these. Its a shame but its just too far and it doesn't look like anyone can collect. Or I can wait and see if Dean decides to sell it after his little jolly to Devon! Ironically were in Devon now but leave on Saturday.Discovery 4 GS 2009 Auto Stornoway Grey
Discovery 3 s 2005 Auto Bonatti Grey Gone
Discovery 3 SE 2005 Manual Zambezi Silver Gone
Range Rover Sport HSE 2006 Black
Aston Martin DB7 VV
19th Aug 2020 8:48 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
nigethecat wrote:
I had been pricing up a spare 22mm socket, a 3/8th to 1/4 inch adaptor, and cutting the handle off a screwdriver with a 1/4 drive that's lost the magnet, welding (or gluing it) all together so it sticks up through the floor and into the boot... might end up costing me a tenner (will keep an old 1/4 drive socket in the rear cubby) but won't look as pretty as your solution
If you could take a photo of the workings of your neat little gadget I'd be very grateful
Hi nige
No probs my friend , I’ll take it apart and indeed take some pics for u
I’ll get in done in the next few days for u
Also wonder with the original spare wheel winch that has the 22mm shape nut on it
if u can drill it, use a tap to cut a thread and then put a re bar with a lock nut in the end , or some lock tight , cutting the re bar to length and then use 2 x nuts on the end to put a spanner or socket on the end
Or as u also say ref welding, maybe threaded bar on the end of a socket
Hope that sort of makes sense
19th Aug 2020 9:47 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Well didn’t realise with the raw jack fitted that handle from the kit fitted
19th Aug 2020 10:02 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
pwheeldon wrote:
I think ill have to just make one of these. Its a shame but its just too far and it doesn't look like anyone can collect. Or I can wait and see if Dean decides to sell it after his little jolly to Devon! Ironically were in Devon now but leave on Saturday.
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
still "winning" ... have taken note of comments in the "goat" thread. and ignored them.
20th Aug 2020 8:51 am
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2922
pwheeldon wrote:
I think ill have to just make one of these. Its a shame but its just too far and it doesn't look like anyone can collect. Or I can wait and see if Dean decides to sell it after his little jolly to Devon! Ironically were in Devon now but leave on Saturday.
I may be missing something but are the drawers not in Brecon, ie mid Wales?Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
20th Aug 2020 9:22 am
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4695
I'm still winning !! not sure what I'll do if I win ... probably offer to take SWMBO to her mate's place in Devon and hope she doesn't notice the slight detour
You've got to read the whole thread chaps ! do try to keep up
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but won't look as pretty as your solution 
