Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Strange noise after oil and filter change
Hi all does anyone know what the below sound is please
Just done oil and filter myself and driving home this sound started and the auto brake release light come on!
Thanks in advance
21st Oct 2020 6:54 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
How did you fit the oil filter.
Did you locate the nipple in the hole at the bottom and then fit the top. If you havent its possible that the filter is in the wrong postion and has been crushed.
21st Oct 2020 7:08 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Hi I put the filter in first with the nipple at about 7oclock, where it felt in place. Then tightened the casing over it.
Does this sound right to you?
Let’s say it’s crushed when I open it, what should I do please? Suck out the broken plastic?
21st Oct 2020 7:20 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
Could be coincidental but Id have the filter out to see before driving again, change the filter and inspect for signs of oil starvation and cross everything and touch as much wood as possible!
maybe you just dripped some oil on the aux belt or your alternator is on the way out!Must stop buying shiny toys....
21st Oct 2020 7:20 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
There won’t be broken plastic
It just squashes.
21st Oct 2020 7:25 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
I took the oil filter back out and it was definitely installed good. And inside seemed to be evenly filtering oil and no issues.
Fit again and still the squeak persists.
Sprayed contact cleaner on the fan belt I think it’s called?
Diagnosed with my ap2000 Autel tool here’s a few pics if it gives anything away?
21st Oct 2020 7:49 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
Have you checked the top intercooler hose for a split - that can make a similar noise when the air is passing throughMust stop buying shiny toys....
21st Oct 2020 7:57 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
There was no problem 1 hour prior been fine just happened when oil was done
It sounds like a rotating squeak and increases with revs
21st Oct 2020 7:58 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
Does sound like a bearing but difficult to assess - is it from the front of the engine - like near the tensioner or water pump or further back?Must stop buying shiny toys....
21st Oct 2020 8:10 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
I can’t tell where it’s coming from other than engine bay sorry.
Was fine a hour before, would a bearing just go like that?
21st Oct 2020 8:12 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Hi it wouldn’t be anything to do with not putting the skid plate back on?
Wondering if the bolts were also holding something else maybe?
21st Oct 2020 9:38 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
I also bled the coolant hose in the engine bay if this could have caused it!
As my heating won’t work
21st Oct 2020 9:40 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
Clear the codes and see what returns.
21st Oct 2020 11:44 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
That’s a good idea will clear them and drive again then recheck?
21st Oct 2020 11:54 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
You didnt spill any oil or coolant on to the belts did you?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum