Angliapaul
Member Since: 12 Nov 2020
Location: Kent
Posts: 2
  
|
Hi guys
Have had to re-register this evening as a new user as I cant get a reset code for my previous user nams....
Anyways, having a bit of an issue with the old girl today...
Been running fine up to now. Got in the car today and once I had started it, the red triangle illuminated along with the EML.
Ive read the code and its come back with P010D.....Mass or Volume Air Flow B circuit high.
The dash is saying reduced performance and the car will not accelerate so is a bit dangerous to drive.
Can anyone help? I'm assuming the Mass Air flow has developed a fault. There appears to be 2 sensors on the air intake/outlet pipes from the air box. Is this the problem? Just a clean out by taking the airbox and filter out or do I need to dig deeper?
Any help will be much appreciated
TIA
Paul
|
 12th Nov 2020 10:16 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2893
 
|
The two MAF sensors are interchangeable so could be swapped to see if the fault follows the sensor, and can be cleaned with spray on MAF cleaner- don't wipe them or use anything else.
Worth having a good look at the pipework and inlet covers though as possible that the code may be a red herring Must stop buying shiny toys....
|
| 12th Nov 2020 10:34 pm |
|
|
Angliapaul
Member Since: 12 Nov 2020
Location: Kent
Posts: 2
|
Thanks for the advice. I swapped over the 2 MAF sensors as you suggested this evening and yes the Air Flow circuit B has cleared and now showing A as high so it looks like the MAF sensor is toast.
One ordered and I'll let you know if it clears when I have put it on.
Regards
Paul
|
| 13th Nov 2020 8:50 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2893
|
Worth trying some MAF cleaner on the faulty one - can't make it any worse... Must stop buying shiny toys....
|
| 14th Nov 2020 9:46 pm |
|
|
