Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Faults Will Not Clear
Would anyone know what these faults are please. I matter how many times I clear them they just reappear.
Thanks.
12th Jan 2021 7:47 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
A, what is the back story, ie does everything work/what prompted the code reading?
B, the pic is so small when I enlarge it it is very blurry.
12th Jan 2021 7:51 pm
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Thanks for reply. Everything as far as I can tell works. The only reason I read faults is last couple of times of using FBH I have turned on with altox app and it’s only run for about 15 mins then get a text saying it does not respond to commands or something like that. Did a FBH test with IID and it all seemed good.
12th Jan 2021 9:22 pm
Weyboat
Member Since: 13 Apr 2018
Location: Weymouth
Posts: 273
From the manual
U0422-86
Using the manufacturer approved diagnostic system,
check the central junction box for related DTCs and
refer to the relevant DTC index
AND
U3000-55
Using the manufacturer approved diagnostic system,
re-configure the automatic temperature control
module with the latest level softwareGone 2016 Landmark D4
Current 2015 HSE D4 - AKA - 'Gandalf the Grey'
12th Jan 2021 10:43 pm
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Thanks for that.
Still not really any wiser. Does that mean that some sort of updates are needed.
Cheers
13th Jan 2021 6:48 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Oscarsball wrote:
Thanks for reply. Everything as far as I can tell works. The only reason I read faults is last couple of times of using FBH I have turned on with altox app and it’s only run for about 15 mins then get a text saying it does not respond to commands or something like that. Did a FBH test with IID and it all seemed good.
How hard is it to unplug/pull the fuse on the Altox? then see if the codes will clear, if so you will then have an idea whats what.
Always seems to be posts on here from people with altox issues, not sure if its the car or the altox at fault?
13th Jan 2021 7:37 am
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Yes did that but only really as a precaution because there was not actually any faults related to FBH.
The only faults are the ones mentioned. I only used IID because I expected to see faults for FBH because it’s been mucking about. I don’t know what the faults shown relate to but didn’t think they are FBH related and still there after pulling fuse.
Cheers
13th Jan 2021 8:09 am
Admirable
Member Since: 19 Jul 2015
Location: Fife
Posts: 1039
Does the FBH kick in on it's own when the temp is low without using the Altox?
Those are only communication faults, nothing to worry about, check your battery is ok.
Flack
13th Jan 2021 10:06 am
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Admirable wrote:
Does the FBH kick in on it's own when the temp is low without using the Altox?
Can’t say for definite but I think so yes.
Cheers
13th Jan 2021 10:08 am
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
Flack wrote:
Those are only communication faults, nothing to worry about, check your battery is ok.
Flack
Thanks for that.
Funny enough I did get a error text from the altox once about low voltage but the battery is probably only 5 months old. I did post the other day about having changed the rear seat 12v socket for a usb point and just seen that it is illuminated constantly and was wondering if that was draining battery.
Cheers.
13th Jan 2021 10:11 am
Admirable
Member Since: 19 Jul 2015
Location: Fife
Posts: 1039
Have you disconnected the 6 pin power connector to the Altox recently?
13th Jan 2021 11:30 am
Oscarsball
Member Since: 29 Apr 2017
Location: East Sussex
Posts: 191
No to that. To be honest it’s been running fine and not had any need to do anything to it.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
