Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > In Car Electronics (D3)

Terminal pins
Post Reply  Down to end
Page 1 of 1
Jong0211
 


Member Since: 07 Feb 2021
Location: Warwickshire
Posts: 99

United Kingdom 2009 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3
Terminal pins

Am I being thick? Started the D4 screen upgrade and for the life of me can’t get the pins out this terminal! Driving me crazy
  
Post #221361525th Feb 2021 11:37 am
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

You need a old fashion hair clip, cut the platic ends off and slightly bend them down, you then need to insert it in to the plug to get both locking tabs in to extract the pins, there are pin extractors on ebay but they are Censored .


Flack Thumbs Up  
Post #221361925th Feb 2021 11:59 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10689

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

They are a very difficult connector to do

Remove red front
Push wire in from the back (to relieve pressure)
Using a paper clip or similar, push it in from the front.
Push it in on the outside of the terminal.
You are trying to prod a plastic tab in the outside that holds the terminal there
Then when you think you have, pull the wire  
Post #221362825th Feb 2021 12:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Jong0211
 


Member Since: 07 Feb 2021
Location: Warwickshire
Posts: 99

United Kingdom 2009 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Thanks all. Done now except a bit of trimming. One final question (on this subject anyway 😉) what adapter do I need for reverse camera? Flacks write up says it’s in the square grey plug but mine is a rca plug and I had no old plugs come with d4 unit. Cheers  
Post #221366725th Feb 2021 3:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10689

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

yeah there is a grey 6 pin connector.
The camera needs connecting to the center 2 pins.

A computer connector will work.

Have you conencted the speed single up ok ?
If you don't have a spare terminal, use the green wire (that does NOT go into a black screened cable)
and I'll tell you how to connect at the other end of it  
Post #221367525th Feb 2021 3:42 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site