Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753
Now three left
25th Feb 2021 10:08 am
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Now 2 after my purchase hoping it will fit over the hole I had to cut for the RDX switch I fitted 2 weeks ago because I couldn’t find this!2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
4th Mar 2021 11:25 pm
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 309
Back up to 4 available with 8 sold!
5th Mar 2021 7:36 am
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753
I guess they have a larger stash and drip feed the market...
5th Mar 2021 7:15 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
Great find - thanks for posting.
There is one on its way to me now.... hopefully they fit a Disco 4. I’ve bought a connector plug from the forum shop too.
6th Mar 2021 7:35 am
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Relay happy, ordered mine at 11pm Thursday night, arrived today’s post. Looks great 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
6th Mar 2021 8:13 pm
Duc750
Member Since: 07 Aug 2017
Location: northampton
Posts: 314
was it easy enough to fit without the template to cut the dash ?05 D3 V8 HSE, LR Passion tree bars, wildbear compressor guard, LRP switch panel, ARB rear locker + compressor, Trigger 6 shooter electrical system
12 RRS SDV6 HSE (Hers) - Gone and replaced with an I Pace - I can tell you now EV is not the future yet
Metalian Camper trailer
6th Mar 2021 9:17 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
I’d already made a hole to fit a larger RDX switch last week so it just went straight in. But as it comes with the cover plate, you can just hold it to the panel, draw round the hole and cut. The first 1/2 is just foam the plastic behind is quite tough but drill through then square off with a Stanley.2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
6th Mar 2021 9:25 pm
Duc750
Member Since: 07 Aug 2017
Location: northampton
Posts: 314
cool so the cover plate is dead flush into the foam, that makes it easier05 D3 V8 HSE, LR Passion tree bars, wildbear compressor guard, LRP switch panel, ARB rear locker + compressor, Trigger 6 shooter electrical system
12 RRS SDV6 HSE (Hers) - Gone and replaced with an I Pace - I can tell you now EV is not the future yet
Metalian Camper trailer
6th Mar 2021 9:29 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Kit comes with the switch, back plate and front panel but not the connector and pins2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
6th Mar 2021 9:32 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
Mine has only just turned up today... problems with the local post sorting office it seems. Could I ask someone to let me know how to fit this on a D4 please? Does the plastic part that needs to be drilled come off or is it fixed/has to be drilled in place?
Thanks!
16th Mar 2021 9:51 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Hi mjom89
Check if the front plate fits the space first, never tried them on a D4, however if it fits, and your fitting in the same place (red square in pic) then yes, it needs to be cut in place, but remove the Center console edge first (red circle in pic) that should allow you to get behind the panel your cutting to check for obstructions / wiring in the way
Hole only needs to be big enough for the switch. If you put the mounting plate up to the panel and draw round inside the hole. Mounting plate then screws over the hole, then grey cover plate hides the shoddy workmanship 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
16th Mar 2021 11:49 pm
Green Land Rover
Member Since: 21 Oct 2017
Location: Stourbridge
Posts: 412
Wonder if it could be adapted to fit one of these for D4?
Click image to enlarge
From: https://www.landroverpassion.com/en/produc...ash-panel/Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
Thanks both - I will have a proper look tonight. It seems as if the cover plate may need to be adapted to fit a D4 but time will tell. I would like it in the correct location ideally, even if it means adapting the cover plate a little.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
hoping it will fit over the hole I had to cut for the RDX switch I fitted 2 weeks ago because I couldn’t find this!
