Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
[For Sale] Dicovery 3 TDV6 2.7 S Manual - Spares/Repair.
Hi,
Sad sale of our Discovery 3 TDV6 2.7 S manual, grey cloth interior. To cut a long story short, it has a suspected bearing failure.
Engine started tapping, had it to our local LR garage who had a stethoscope on it, identified tapping from LH bank. Stripped it to look at the tensioner, which turned out to be ok. They suspect a bearing, but I cannot afford/justify the cost to investigate any further.
So, being sold as spares or repairs, sold as seen, for this reason.
Just under 168k on the clock. As far as I can think, everything works as it should do - aside from the air con which must have a leak somewhere. When re-gassed it's fine for a week or two, then stops blowing cold! Never had any issues with the suspension, some good grabber AT3's all round. Age-related wear & tear.
I'm looking for £1k, it is available now. It starts and drives, but I would strongly recommend trailer/towing it away.
Click image to enlarge
Click image to enlarge
24th Apr 2021 12:42 pm
ronnie12342003
Member Since: 20 Jun 2016
Location: london
Posts: 55
big end or crank bearings ? or camshaft bearings
26th Apr 2021 11:53 am
ronnie12342003
Member Since: 20 Jun 2016
Location: london
Posts: 55
have you any pics of inside cheers
26th Apr 2021 5:47 pm
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
Hi Ronnie,
I don't know which bearings I'm afraid. I was going to take some pics of the inside after I'd given it a bit of a vacuum! But will try and get some this evening if you're still interested and don't mind muddy mats etc.
27th Apr 2021 7:46 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73086
How mine started, first a tap tap, then a flap flap as if something loose underneath, then screeching, then car was stripped and scrapped. And about 1k miles before yours.
27th Apr 2021 7:54 am
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
Ooooo, wow! That does sound very screechy! Makes mine sound great...tempting to carry on running it and see how long it lasts!!!
If I had the space (which, unfortunately I do not!) I'd be either seriously considering a repair, or breaking, as you did. However, no space, so it's going to have to go.
27th Apr 2021 8:02 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73086
Now that sounds like an adventurer, just make sure you have right level of AA/RAC/GF/etc so when it does go it’s covered. Recovery is not cheap without it.
27th Apr 2021 8:15 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26775
arthurdent wrote:
Ooooo, wow! That does sound very screechy! Makes mine sound great...tempting to carry on running it and see how long it lasts!!!
That’s what I’d do. Nowt to lose!
27th Apr 2021 9:07 am
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
Yes, tempting - as you say, nowt to lose! Though depends how it fails I guess!!!
DSL wrote:
Now that sounds like an adventurer, just make sure you have right level of AA/RAC/GF/etc so when it does go it’s covered. Recovery is not cheap without it.
Yes, appropriate cover would be a must!!!
27th Apr 2021 9:12 am
ronnie12342003
Member Since: 20 Jun 2016
Location: london
Posts: 55
good idea blow it up then sell it no thanks keep it
27th Apr 2021 10:07 am
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
Haha, indeed! It would definitly be a case for the scrap man!
27th Apr 2021 10:44 am
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
Just to clarify Ronnie, I wasn't suggesting running it to death (or even running it) then selling it on as a potential repair!
I would much rather see this repaired then scrapped.
Though, the curiosity in me would be interested to see how long it could go for before thumping to a standstill!!!
27th Apr 2021 10:47 am
arthurdent
Member Since: 11 Nov 2019
Location: Derbyshire
Posts: 52
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
