Garybaldie1981
Member Since: 15 Mar 2018
Location: Castleford
Posts: 21
  
|
Hi guys I have recently fitted a double din upgrade to my d3 .
It had the Harmon Karon system bought the kits to retain the amp.
I am wanting to install a rear camera but where can I take a feed from with it being on the can system will it cause problems if I take a feed from the reverse light or is there a better place to a feed from for the reverse signal
|
 15th Apr 2021 7:23 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
 
|
You can take it from the reverse light
Or even the rear of the power socket
|
| 15th Apr 2021 7:29 pm |
|
|
Garybaldie1981
Member Since: 15 Mar 2018
Location: Castleford
Posts: 21
|
Cheers Pete that’s great
|
| 15th Apr 2021 8:53 pm |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 700
 
|
If you used a connects2 harness you can use the reverse lead instead of running it back to the tail light.
|
| 16th Apr 2021 3:07 am |
|
|
Garybaldie1981
Member Since: 15 Mar 2018
Location: Castleford
Posts: 21
|
Hi I used the just car kits kit for it I don’t think there is a reverse wire there but I will check
|
| 16th Apr 2021 4:57 am |
|
|
BradC
Member Since: 29 Apr 2019
Location: Perth
Posts: 119
|
For something different I used one of these : https://www.altronics.com.au/p/s6038-fuse-...ini-blade/
I tapped fuse P6 (Relay switched reverse for the trailer socket) to supply both the reverse signal and power to the camera.
|
| 18th Apr 2021 4:10 pm |
|
|
