Rikkent
Member Since: 12 May 2021
Location: Kent
Posts: 5
|
Hi all new to group I am wondering if some one can give me some advice. I have a few fault codes that I cannot clear. Granted not using a brilliant tool to get theses codes but I have checked battery seems fine. Checked under the passenger wheel arch all lookes ok. Looked down the passenger side this at the wiring all looks OK. New break switch all looks OK. I am had the control module out not signs of water damage nor corrosion on the pins or plug. I have also had the steering senor recaibrated still no joy
Car Scanner ELM OBD2
DTC report
Selected brand: Land Rover
VIN: SALLAAA137A441651
============1==============
U0416(86)
Raw code: C41686
ECU: 2B
Status: Test failed, Test failed (current drive cycle), Pending, Test failed since last DTC clear, Warning indicator requested
OBDII: Invalid data received - vehicle dynamics control module
============2==============
U0421(94)
Raw code: C42194
ECU: 1C
Status: Test failed, Test failed (current drive cycle), Pending, Test failed since last DTC clear
OBDII: Invalid data received - suspension ride height control module
============3==============
U0403(94)
Raw code: C40394
ECU: 1C
Status: Test failed, Test failed (current drive cycle), Pending, Test failed since last DTC clear
OBDII: Invalid data received - transfer box control module
============4==============
U0416(94)
Raw code: C41694
ECU: 1C
Status: Test failed, Test failed (current drive cycle), Pending, Test failed since last DTC clear
OBDII: Invalid data received - vehicle dynamics control module
============5==============
P080A(00)
Raw code: 080A00
ECU: 1A
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test not completed since last DTC clear, Test failed since last DTC clear, Test not completed during this operation cycle
OBDII: Clutch position not learned
No work has been done on the car recently
|
17th May 2021 12:01 pm |
|
|
Rikkent
Member Since: 12 May 2021
Location: Kent
Posts: 5
|
Also sorry all for got to say I have a discovery 3 hse 2.7 auto
|
17th May 2021 12:03 pm |
|
|
Rikkent
Member Since: 12 May 2021
Location: Kent
Posts: 5
|
Pics of my dash
|
17th May 2021 12:04 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6266
|
tried hard reset?
|
17th May 2021 1:29 pm |
|
|
Rikkent
Member Since: 12 May 2021
Location: Kent
Posts: 5
|
Yeah I have tired that as well I am loosing my mind lol
|
17th May 2021 1:58 pm |
|
|
Rikkent
Member Since: 12 May 2021
Location: Kent
Posts: 5
|
Seems to be a faulty earth to the relay volts don't seem to be there and the relay does not engage? This in the the fuse box next to the battery
|
17th May 2021 3:06 pm |
|
|