Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > Technical (D3)

Discovery 3 EPB wont stay on keeps releasing
Post Reply  Down to end
Page 1 of 1
MAC123
 


Member Since: 30 May 2021
Location: Knutsford
Posts: 23

United Kingdom 
Discovery 3 EPB wont stay on keeps releasing

I Have just replaced the rear brake back plates on my Discovery 3 2.7 2005 . The EPB wont stay on , I can hear the Actuator working and it does put the parking brake on for a second then releases again and a loud screeching sound from the rear of the Discovery . I have adjusted the brake shoes as they should be adjusted , fully tightening the shoes with the disc on then backing off 8 clicks one full rotation , also carried out the bedding in procedure by driving and applying the hand brake which does work and stop the discovery. The Red Brake light on the dash is flashing all the time and the orange light comes on and goes off . Any help would be appreciated . . Also says brake fault. TIA  
Post #225269321st Sep 2021 7:21 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

You need to get the fault codes read to find out whats going on with the module Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE  
Post #225271321st Sep 2021 8:21 pm
View user's profile Send private message View poster's gallery Reply with quote
MAC123
 


Member Since: 30 May 2021
Location: Knutsford
Posts: 23

United Kingdom 

Thanks for the Reply aja4x4 . I have found out what the problem is , its the actuator motor one of the gears has broken which has a spring clutch system . Its a common problem apparently , if the cables or brake shoes seize or become very stiff . I Have ordered the repair kit. As my back brake plates / covers had rusted away all the road water and dirt had made the hand brake adjustment on the shoes very stiff , which has put extra pressure on the motor plastic gears causing one to break .  
Post #225273021st Sep 2021 11:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1810

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

Take photos of the rebuild  
Post #225300423rd Sep 2021 10:03 am
View user's profile Send private message View poster's gallery Reply with quote
MAC123
 


Member Since: 30 May 2021
Location: Knutsford
Posts: 23

United Kingdom 

Will do Globetrotter448 , Just waiting for the the repair kit (new gears ) to arrive.  
Post #225302823rd Sep 2021 12:49 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site