G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 858
|
Is the fuel filler cap locking bolt a separate item?
Mine appears to have snapped.
|
26th Sep 2021 4:59 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10644
|
It’s part of a cable.
Like a bicycle cable or Bowden cable
|
26th Sep 2021 6:20 pm |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 858
|
The tip that protrudes to lock the flap appears to have snapped
|
26th Sep 2021 6:50 pm |
|
|
SpiderBaby
D3 Decade
Member Since: 21 Sep 2007
Location: Liverpool
Posts: 1409
|
Yep - had it on mine years back
Easy enough to fix - there's kits and plenty of videos showing how to do it on the web I see no ships........
|
26th Sep 2021 7:33 pm |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 858
|
Thanks. I will look.
|
26th Sep 2021 7:35 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10644
|
I did a very cheap bodge fix on mine
I cut a bit off the outer black cable (the same length as you wish it to protrude out the lock). Don't do too much.
Then cut the stop off the plastic bolt, so it can go further than it used to.
Job sorted !
You just don't want it going in too far and getting stuck, so don't over do it.
P.S Don't be fooled with BMW or mini cables which look the same, but are a different size!
Last edited by Pete K on 26th Sep 2021 8:14 pm. Edited 1 time in total
|
26th Sep 2021 7:51 pm |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 858
|
|
26th Sep 2021 7:57 pm |
|
|