Philnic
Member Since: 09 May 2018
Location: Theydon Bois, Essex
Posts: 45
|
Christmas Tree lights - what have I done |
|
So yesterday I did the air con rear pipe delete - to do so I unplugged the bottom two wiring looms, TCCM and the one behind. Put it all back together and then started to change my upper screen inside for a replacement android screen - all looms supplied including a loop for the orange cables (Canbus?)
Today I have a christmas tree! Plugging the iid in it seems like its canbus - communication failures everywhere, and it won't even turn over.
So I take the battery out again, unplug and replug in all the connections behind the battery, do a hard reset whilst there. I also reverse all the changes with the screen, so its all totally stock.
Now it will start, but still full of errors (transmission, suspension, parking brake etc). I can clear them and they come back.
I don't know what to do next! Any ideas? 2006 Java Black Metropolis - my first dip into the D3 world!
|
24th Sep 2021 4:49 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10644
|
Charge battery over night ?
|
24th Sep 2021 7:31 pm |
|
|
Philnic
Member Since: 09 May 2018
Location: Theydon Bois, Essex
Posts: 45
|
Yeah funnily enough going for that, but I dont think thats it, its showing as charged, and its not old.
Have also pulled the TCM module connections and a couple have some verdigris, so will try cleaning that... 2006 Java Black Metropolis - my first dip into the D3 world!
|
24th Sep 2021 8:22 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12980
|
so ... pin corrosion/muck is likely problem but, whilst it's a PITA, you may need to rewind the changes you did but do it 1 at a time and keep checking.
Hard reset may also be an idea ... but remember to wait a while ( > 10 mins ? ) before shorting the battery leads. some ecus have a knack of misbehaving if not fully "asleep" when you do the reset.
|
24th Sep 2021 8:41 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1810
|
I would check those connecters again and where they plug into as that is more than likely where the problem is.
|
25th Sep 2021 9:31 am |
|
|
Philnic
Member Since: 09 May 2018
Location: Theydon Bois, Essex
Posts: 45
|
All sorted - cleaned up all connections and we seem to be good! Thanks all! 2006 Java Black Metropolis - my first dip into the D3 world!
|
26th Sep 2021 9:01 am |
|
|