Member Since: 19 Sep 2021
Location: Yorkshire
Posts: 38
Engine system failure
Hi, I'm getting engine system failure on start up, the car does drive with some power but does not rev right up n goes into limp mode until you let the engine return to idle, the only fault coded I'm getting arr P0048-00 and P0046-00, which clear but come back on when ignition is cycled, is this a wiring fault or is my turbo actuator faulty?
2nd Nov 2021 9:40 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4996
It might be just the wiring/connector that's in trouble, as those codes refer that rather than the motor. Though it could still be a motor problem too, but it's not that common unless the vanes have been jammed.yµ (idµ - eAµ) ψ=mψ
2nd Nov 2021 10:25 pm
trob86
Member Since: 19 Sep 2021
Location: Yorkshire
Posts: 38
Fixed, the rod had come off the turbo!
8th Nov 2021 9:22 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4996
That's a new one, well to me at least. yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
