thomasz
Member Since: 01 Oct 2021
Location: Kulmbach
Posts: 108
  
|
Hi!
is there a special trick to bleeding the brake lines on the rear axle? 
I swapped the rear calipers and hoses and the small lines. Of course, the brake fluid in the lines ran empty.
I've already bled twice with a bleeder - there are always small bubbles at the back. But everything is tight.
After a while, almost no more come. When the car is standing still, I can press the pedal a little too far again.
Do I have to tilt the car somehow (higher at the back, for example)?
Or just be patient and let another liter of brake fluid flow through? 
Thomas
|
 7th Mar 2022 6:00 am |
|
|
