| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
  
|
| Locations to find these please. |
|
Received the IID tool on the morning of raking the caravan on holiday.
Playing a bit now.
Can someone please tell me where I can find:
Parking sensor control unit
Suspension valve block for the rear.
Sensors haven’t worked a little while. After clearing faults it comes up with power issue on the sensors.
Suspension had its gremlins. Once I stated recalibrating a lot was sorted.
Left with rear left height sensor
Slow drain of suspension.
If I clear faults, and lift or drop suspension straight away, it works fine most of the time. After a while it says normal height only. When calibrating, I can go up or down on the front, but the rear doesn’t drop. I can here a click every time I press the down arrow, but nothing happens. Guessing some sort of sticky valve.
Ideas welcome. MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
|
 15th Apr 2022 10:35 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10676
 
|
Park sensor is in rear left panel of boot, however a more common issue is a shorted sensor. Difficult to locate which one though. I recommend you disconnect the front loom under the drivers headlight. Clear faults and see what returns. Obvs you will get front sensor errors, but has the power one gone or does it remain.
Regarding rear not dropping. Ensure park brake off. See if it makes a difference. Valve block under car and nightmare to get to.
|
| 15th Apr 2022 12:29 pm |
|
|
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
|
Thank you.
SWMBO decided that as we were on holiday, I want allowed to 'play' with the car and my new toy.
Didn't help that I was bored after 20 mins in stationary traffic. Decided to look around the app. Found the bit where you can change the digital speed to km. Thought I would try that. Didn't read where it shuts the car down while it resets everything, and takes about 5 mins. Typically the road opened while that was happening. Had to sit with hazards on until I could start it back up.  MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
|
| 17th Apr 2022 8:06 pm |
|
|
ianm27
Member Since: 02 Jun 2016
Location: Hertfordshire
Posts: 2154
 
|
And I imagine SWMBO was very happy
 Uncle Ray's spare wheel protector
Limo Tint
Blackvue front & rear dashcam
Cruise control switch pack
Bodsy's remote for FBH
|
| 18th Apr 2022 1:03 pm |
|
|
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
|
She was ecstatic! MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
|
| 18th Apr 2022 1:14 pm |
|
|
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
 
|
Wait until you play with it again while not at home and you drain the main battery while updating an important ECU who happened to be bricked after that…
See how she reacts then….  Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc. 
|
| 18th Apr 2022 2:24 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13018
 
|
I thought that, on a D4, switching to KM/H can be done on the menu on the dash?
Can on mine and works on the fly without any interruption. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 18th Apr 2022 3:03 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1664
 
|
As above. That is how it works on mine. No need for IID to change to Km/h. Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 18th Apr 2022 4:30 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
