Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

Absolute safest lowest clearance with expo rack
Post Reply  Down to end
Page 1 of 1
SN
 


Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710

Absolute safest lowest clearance with expo rack

So I got my step ladders out (don't laugh) and a plank of wood and meaured the absolute height of the D3 + G4 Expo Rack (no lights as yet) in access height.

I got, with two separate measurements with two tapes a height of 2.06m (6'9" in old money Thumbs Up )

First question - does anyone/everyone concur this is OK?

Second question - I reckon 2.1m is the absolute lowest clearance I'd be prepared to go under on the flat - does anyone/everyone concur ?
 Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)   
Post #28015631st Mar 2008 7:53 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Alex08
 


Member Since: 09 Nov 2006
Location: Glasgow
Posts: 1600

Scotland 

If it helps, when I was trying to park in underground carparks on holiday in ACCESS I got into the 2.10m but had to reverse out of the 2.05m having got the height sign stuck on the back of the rack! Embarassed

So 2.06 is probably a bit fine. 2.10 is OK - take your chances in between Whistle
  
Post #28023731st Mar 2008 9:29 pm
View user's profile Send private message View poster's gallery Reply with quote
SN
 


Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710


Well I've been skulking around the underground garage tonight with my tape measure taking spot measurements...

First the bad news - to get to my official spot I have to get past a bl**dy soil pipe or heating pipe or something that is EXACTLY 2.00m above the concrete .... Big Cry

Now the really bad news - I went and measured the dangling board at the entrance and that measures 2.10m Shocked

So an unsuspecting soul could breeze in under the height barrier thinking they were OK and crunch, wipe out the roof of their vehicle and part of the building waste/heating system at the same time.... VERY CLEVER... NOT! Evil or Very Mad

At this point I'm a bit P-O'ed but I wandered up to the upper level of the underground garage and noticed that its got a good clearance of around 2.4 all around (confirmed with tape) - so a quick word with the 'immigrant' building concierge fellow (who'd been watching me with interest using the spy cameras Whistle ) and alls well that ends well - coz he "knows" of a couple of spots that are never used - so RESULT, I can get the beastie parked up safe and sound 'dahn sahf' now! Thumbs Up
 Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)   
Post #2819033rd Apr 2008 7:48 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
MX
 


Member Since: 04 Mar 2006
Location: Capital of Culture
Posts: 439

United Kingdom 

I'm so glad - I would not be impressed that I got bl Censored dy soaked taking my rack of for nothing Laughing
 D3 05 SE (old one)

RRS 08 SE (new one)


formerly mxgeldar7 
 
Post #2819063rd Apr 2008 7:51 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
SN
 


Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710


I'm so glad too! Do not want to go through the rigmarole of taking it off for some time Rolling Eyes
 Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)   
Post #2819143rd Apr 2008 8:00 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DaveT
 


Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2575

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Indus SilverDiscovery 4

I parked min under the lowest bit of garage door & measured down to car, then deducted this from total height of doorway, and the precise height of mine was about 7' or 2.1m for the foreigners amongst us.

That is: Access mode + Expo, measured to top of rear cross bar (seemed to be highest point)
The LF 140's on the front stick up a few mm higher.
 Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project! 
 
Post #2819213rd Apr 2008 8:08 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site