| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 684
  
|
| Repairing a hole in the side of a caravan. |
|
As many do my Bailey (aluminium skin, polystyrene insulation) has a door retainer to hold the door back.
The door part is not a problem, it is just self tapped on but the van side half I presume has pulled out some time in the past. It has been repaired using rubber Well nuts. The resulting hole is far larger than the M3 or M4 Rivnuts I would prefer to use. The Well nut has a relatively thick flange stopping the door retainer sitting flush on the skin.
If I have to I will re-use Well nuts although one had pulled right through. Does anyone of the engineering geniuses on here have a suggestions of a flush fitting alternative before I go back to the original solution A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
|
 4th Mar 2023 6:34 pm |
|
|
Navigator
Member Since: 17 Mar 2010
Location: Stay at Home. One of the lives you save could be your own.
Posts: 5113
 
|
What is behind the side panel at that point? Alternativly, it could be simpler to plug existing holes and finish off with an appropriate sticker, and refit the door retainer higher up. A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
|
| 4th Mar 2023 10:07 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13021
|
Why not reuse Well nuts but add a layer of suitable sealant to fill the gap? With the right stuff, the Well nuts would chiefly be to keep it in the right place whilst the sealant cures, so if 1 of them is a bit loose it's not an issue. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 5th Mar 2023 4:28 am |
|
|
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 684
|
I was just hoping for an Idea I hadn't thought of.
The other side is a plain wall above a a worktop, my dislike of the Well Nut solution does not extend to spoiling that.
I have ordered new Well Nuts and I will modify the bit that sits on top of the nuts to clear the nut flange. A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
|
| 5th Mar 2023 7:11 pm |
|
|
Navigator
Member Since: 17 Mar 2010
Location: Stay at Home. One of the lives you save could be your own.
Posts: 5113
|
will modify the bit that sits on top of the nuts to clear the nut flange.
Could be an easier job to make a packing piece washer slightly thicker than the well nut head with appropriate sized holes in it. In fact, caravan dealers sell such things in little packets. A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
|
| 6th Mar 2023 10:37 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
