Member Since: 09 Nov 2019
Location: Berkshire
Posts: 19
OBD Port
Hi all, I have MY14 (facelift) and have a dummy OBD port to put in place where real one is. How easy is it to remove the cowling under the steering wheel? I've had a quick play with it but don't wanna grapple to much with it in case something snaps 🤔.MY2014 Discovery 4 XS - Loire Blue
2004 4.0 V8 Discovery 2 - Sadly Gone
2004 2.7 D HSE Discovery 3 - Gone
Series 3 - Went Many Moons ago
21st Dec 2022 8:28 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
If you mean the main panel , then it’s standard Landrover, grab the top and pull hard 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is đź’•
21st Dec 2022 8:38 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753
You can pull the rectangle, the one with an air exhaust, and it’ll get loose. It’s fastened with two Jesus clips ISTR.
The plastic around the steering wheel consists of two pieces fastened with two screws underneath. The top and bottom cowl can then be removed separately.
21st Dec 2022 8:41 pm
Sparky73
Member Since: 09 Nov 2019
Location: Berkshire
Posts: 19
Hey, Thank you for the replies.
There is a rectangular latch but it appears to be broken (Circled - its all loose?? and feels like something has snapped in there) what does it do? but there is also a panel above the pedals (arrowed) where the OBD port is, I did pull about with this but scared I'll snap something.
MY2014 Discovery 4 XS - Loire Blue
2004 4.0 V8 Discovery 2 - Sadly Gone
2004 2.7 D HSE Discovery 3 - Gone
Series 3 - Went Many Moons ago
21st Dec 2022 9:08 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
The “latch” is your crotch cooler it’s actually a deliberate air vent to direct cooling air to the crotch area on long drives….no lie, honest
To remover the cover, pull down and away “briskly” where I’ve circled, it’ll come off, clips at the top and is hooked in at the bottom.
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is đź’•
21st Dec 2022 9:13 pm
Sparky73
Member Since: 09 Nov 2019
Location: Berkshire
Posts: 19
you learn something new every day!!!
Thank youMY2014 Discovery 4 XS - Loire Blue
2004 4.0 V8 Discovery 2 - Sadly Gone
2004 2.7 D HSE Discovery 3 - Gone
Series 3 - Went Many Moons ago
21st Dec 2022 9:44 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
Be ready for the clips to fly out and go into oblivion, put a spot of grease on the clips when refitting to make it easier to get of next time, if you can find them
Next question, how is the socket it’s self held in position?It can when others can't,
It will when others won't,
It goes where others don't.
22nd Dec 2022 11:40 am
Sparky73
Member Since: 09 Nov 2019
Location: Berkshire
Posts: 19
Thanks for that......I'll get the 'quick reflexes' honed
I believe the port is just a push and click type gig......I may be wrong....MY2014 Discovery 4 XS - Loire Blue
2004 4.0 V8 Discovery 2 - Sadly Gone
2004 2.7 D HSE Discovery 3 - Gone
Series 3 - Went Many Moons ago
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
