GS1305
Member Since: 12 Sep 2022
Location: Fogn (Norwegen)
Posts: 5
|
Hello everyone, someone has probably already written about this before. Unfortunately I didn't find it. I removed the LR radio and installed a DAB+. Everything works without any problems. Now here's my little problem. The display of the NAVI (4X4) only shows the LR logo. I bridged most. What's the problem here? The radio is connected to a Connects2 for the CAN bus. Steering wheel control works. I moved the speakers upstairs and connected them directly to the new radio. As I said, everything works. But would like to have the 4X4 info back. Thanks for the help. Greetings Günter
|
 23rd Sep 2023 1:10 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10683
  
|
The display gets most of its data from the factory headunit which you have removed.
If the radio optical most connect is free you can connect the rear part of the old headunit up to it and fit it in the upper glovebox
|
| 23rd Sep 2023 2:22 pm |
|
|
GS1305
Member Since: 12 Sep 2022
Location: Fogn (Norwegen)
Posts: 5
|
I will do it. Thanks 
|
| 23rd Sep 2023 2:27 pm |
|
|
GS1305
Member Since: 12 Sep 2022
Location: Fogn (Norwegen)
Posts: 5
|
I installed a bridge at the top. I still need the signal from the old head unit
|
| 23rd Sep 2023 2:29 pm |
|
|
