Have you left it long enough after switching engine off?.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Nov 2022 5:01 am
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
Check it first thing in the morning before you start the car.
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
Before checking it click the cancel button twice then press the ok button.
Flack
6th Nov 2022 10:22 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 806
^^^^^^^^^^^ doesn't the bonnet need to be open for this to work ?please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
6th Nov 2022 10:27 am
ianm27
Member Since: 02 Jun 2016
Location: Hertfordshire
Posts: 2154
Andy - if the engine has been running you need to switch it off and then leave it for at least 15 minutes before the check oil level function is available on the info screen.
Don't we just love D4's and their foibles Uncle Ray's spare wheel protector
Limo Tint
Blackvue front & rear dashcam
Cruise control switch pack
Bodsy's remote for FBH
So - I want to check my oil level, and for about 3-4 days now my LR4 refuses to help. "Not available"...
Feels like a bad date where I've been stood up a few times!
Is this just a typical electrical glitch, or could something be done to sort it out?
Hi Andy
did you sort this?
I have the same prob. Tried all that's been suggested on this thread. Only thing left is 'try first thing in the morning' Going to do this in the morn and report back.
Just been out at 06.30 and oil level gauge working
Why it will only work stone cold first thing in a morning I do not know...
17th Apr 2023 5:48 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
It isn’t a morning thing it’s oil temperature, liquids expand when hot and depending how hot give a different reading, just like tyres check the pressures when cold
On some older D4s oil level check when worm can be overridden by pressing the cruise button twice.It can when others can't,
It will when others won't,
It goes where others don't.
17th Apr 2023 6:56 am
beanoir
Member Since: 02 Sep 2021
Location: Bedfordshire
Posts: 27
^this!
22nd Apr 2023 5:26 pm
Steamyrotter
Member Since: 03 Jul 2017
Location: Somewhere near Somewhere else in Somerset
Posts: 117
What worked for me..
Bonnet open
Drivers door open
Ignition on but engine not started
Select oil level on dash menu
If not showing press CAN twice in short succession.
Good luckIf things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking .. O
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum