| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
  
|
Anyone got a spare wheel stud and nut knocking around for an 06 D3?
Long story short, Father passed away on Tuesday night. Been busy sorting things at parents home.
Got home and couldn’t sit down. Went and tinckered to take my mind off things.
Snapped the stud tightening up the wheel nut. It then rolled and found the only hole it could fit through.
Nobody has anylocally, and spares places are all saying I need to buy a new hub!
Any assistance appreciated. MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
|
 23rd Jun 2023 11:15 am |
|
|
ronald.soak
Member Since: 29 Apr 2008
Location: London
Posts: 516
 
|
I'm away from base until late tonight but have a front hub there that I have been meaning to knock the studs out of.
The earliest that I might be able to get a stud in the post to you would be tomorrow lunchtime.
Wheel nuts available on eBay from John Craddock for £3.90 inc. post.
If I can get a stud out, (biggest problem is finding the hub), I"ll pm you for your address.
Sorry to hear about your father's death.
If anyone else has a stud I am not going to be put out if they can help out quicker or with more certainty.
John
|
| 23rd Jun 2023 12:02 pm |
|
|
Moo
D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 13957
 
|
Sorry to hear about your dad. Understand why you want to be distracted.
Give these guys a buzz.
https://g-tec4x4.co.uk
They break Discoveries and are very helpful. If they do and you need it collecting, let me know. New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner 
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
Last edited by Moo on 23rd Jun 2023 1:11 pm. Edited 1 time in total
|
| 23rd Jun 2023 12:42 pm |
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4159
 
|
As Ron says very sorry to hear of your loss, went through the same in March.
I have a number of wheel nuts knocking around so pm me your address and I'll get a couple over to you but they won't be there for the weekend, so if anyone closer can drop some off that would be ideal ! I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
| 23rd Jun 2023 12:44 pm |
|
|
Rnclayton
Member Since: 13 Apr 2018
Location: Radstock, Bath
Posts: 564
|
Thank you for your comments. MY07 Freelander2 SE Santorini Black - Gone
MY10 D4 XS Buckingham Blue
MY06 D3 HSE
|
| 24th Jun 2023 9:44 am |
|
|
ronald.soak
Member Since: 29 Apr 2008
Location: London
Posts: 516
|
There is good news and not so good news.
The good news is that I have a stud and a jiffy bag ready to go if you PM me your address. The last post here goes at 12 although the local sorting office may take it later.
The not so good news is that although I freed the studs from the hub, using a club hammer and a discarded locking wheelnut, to protect the threads, the head of the studs could not be withdrawn past the plate which attaches the hub to the vehicle. In part this is due to rust accretions on the plate and hub, (Edit stud not hub), but I suspect that even with new parts there may not be enough clearance. There are 2 possible solutions. Either file a small amount of material off the plate or off of one side of the head of the stud. Only a small amount, (1-2mm?), seems necessary. I ground off part of the plate rather than a rotating part but this is not likely to be practical on the vehicle.
I have run some wet and dry over the stud that I will send you.
Edit Your PM received.
John
|
| 24th Jun 2023 10:49 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
