Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
Xonrich android headunit
Hi,
recently i bought a D3 that came with the original satnav screen. Since i wanted to have a nice and updated navigation system i order a Andrdoid head unit from Xonrich/Smoonavi (https://shorturl.at/cgvI6).
Im strougling a bit with two major topics:
1 - Audio: From what i could understand, audio would play only in AUX mode. From the radio, i could wire the two RCA cables with "AUX lables" to the back AUX port that is available in the passangers row.. No sound.. i tested the port it self with a smart phone and its working... meaning its the radio that isnt output. Any hints?
EDIT: just fixed… I was connecting the AUX IN from head unit.. my bad
2 - About CAN BUS. THe head unit bring a CAN interface and there is one app with Car Info. Im not getting any information displayed. I could see that i can choose the CAN BUS type but there is no option (amoung several options) for Land Rover or Discovery 3.... Any hint of the type of can bus used by Land Rover?
Thanks in advance for your support
Last edited by aribeiro on 14th Jul 2023 7:26 pm. Edited 1 time in total
14th Jul 2023 3:10 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
1. If you removed the old headunit. I think you need to disconnect the green wires to the amp under the seat. And connect the new headunit to these green speaker wires.
14th Jul 2023 5:45 pm
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
I just removed the SatNav. I understood now that I was connecting the AUX IN from the head unit to the AUX of the car… so point 1 is now solved. Just fixed and tested now.
Now, missing the second point..
14th Jul 2023 7:25 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 706
As it isn't integrated with into the CANBUS you wont get any info from it.
18th Jul 2023 6:14 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
Yeah you won’t get any data off the old display connector
CANBUS.
You maybe more successful using the LR headunit connector can bus.
18th Jul 2023 9:42 am
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
But the Android head unit have a CAN bus connection and decoder..
18th Jul 2023 9:44 am
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 706
You said in your post that there wasn't an option for it, unless it has a harness that connects to the factory loom you wont get any data.
Last time i looked at these they only used the aux input for audio connection.
18th Jul 2023 9:59 am
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
Finally made CAN bus work properly
21st Jul 2023 2:53 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
How
And what data are you getting off it
21st Jul 2023 4:59 pm
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
4x4 info
Doors open
Parking sensors
Outside temperature
Mileage
Consumption is not working…
21st Jul 2023 5:40 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2908
any pictures??Must stop buying shiny toys....
21st Jul 2023 9:42 pm
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
21st Jul 2023 9:59 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2908
Must stop buying shiny toys....
21st Jul 2023 10:00 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2908
Just had a look at the website, is it ending from the CAN bus or via an OBDII Dongle plugged into the ODBII Port?
Also this picture not their page made me smile
Must stop buying shiny toys....
21st Jul 2023 10:06 pm
aribeiro
Member Since: 19 Jun 2023
Location: Aveiro
Posts: 18
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum