| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Stevie-l-s
Member Since: 18 May 2023
Location: Knutsford
Posts: 4
|
| Discovery 3 Logic 7 Stereo Upgrade Incartec Upgrade |
|
So I've purchased the following:
InCarTec FK-853-6 Land Rover Car Stereo Fitting Kit (LOGIC 7 with Screen Retention)
Pioneer SPH-DA360DAB 6.8” Wireless Apple Carplay Android Auto DAB/DAB+ Bluetooth Stereo
BLAM AK-LR-01 sub amplifier fitting kit
This is to retain the kit to retain the sat nav. It's all wired in, i had to remove the mother board from the existing unit in order to the uper screen and the logic 7 system.
Their instructions tell you to fit it to the bottom of the centre console below the air vents. If you do this the double din stereo will not fit in the cage. Has anyone fitted any of these and if so where do you put the motherboard?
|
 16th Aug 2023 4:27 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10683
  
|
Upper glovebox
|
| 16th Aug 2023 6:48 pm |
|
|
Stevie-l-s
Member Since: 18 May 2023
Location: Knutsford
Posts: 4
|
I've tried the upper glove box, but it's too big. You can't close it.
It won't close. Have you managed to fit it in there? Also did the cable reach or did you cut the wires to extend them?
|
| 17th Aug 2023 6:53 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10683
|
I haven’t done the mod.
Upper glovebox was the common place for the rear part of the headunit, back in the day
|
| 17th Aug 2023 9:48 am |
|
|
Stevie-l-s
Member Since: 18 May 2023
Location: Knutsford
Posts: 4
|
I've tried behind the lower glove box, inside the upper glove box, down the side of the centre console, the only other option is under the seat, that would require cutting and lengthening the cables that were supplied for this kit. But what doesn't make sense is that they say this kit is supposed to be plug and play.
|
| 17th Aug 2023 11:35 am |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 700
 
|
There is a big empty space just in front of the gear shifter (auto), thats where i have my brake controller that has a remote dial.
|
| 18th Aug 2023 12:23 am |
|
|
Stevie-l-s
Member Since: 18 May 2023
Location: Knutsford
Posts: 4
|
I've tried in there, the motherboard is too big.
I had a reply from incartec technical.
"Hi there isn’t a set place for it ,I know people find it difficult but they do find a place in the end .
Kind regards Shaun"
Not the most helpfull answer seeing as they sell this as a plug and play kit for over £200 . That also gives you specific instructions to fit the motherboard in a place that is too small for it.
|
| 18th Aug 2023 5:55 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
