OK, it's on a house in rural Italy but I figure caravan owners will know.
Two gas bottles, connected by this
Click image to enlarge
Hot water died when gas in rh cylinder ran out and I've only been able to get boiler to reignite when I put a full bottle on rhs, on lh connection it doesn't want to know.
Is this just coincidence ( or impatience on my part ? ) or are these valves capable of failing in a one-sided way?
TIA.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Oct 2023 11:14 am
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2918
That doesn't appear to be a standard changeover mechanism - just a means of (theoretically) isolating one bottle at a time to a common feed for the regulator.
I'm assuming that the lh bottle valve is switched on and that you have opened the manifold (T-piece) valve on the lhs?
If so then I would suggest you close both valves, swap the lh bottle to rh and see if it will run off that. This should at least allow you to confirm whether it is a valve or gas issue.Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
Having swapped to using lh connection, boiler wouldn't ignite.
Moved full bottle to rh connection and all worked.
Moved it back to lh and it failed again.
But moving it back to rh , it took several minutes to start working - maybe purging air ? - which is only reason I'm doubting my diagnosis.
FiL was not for calling the plumber out to it ... much like last year when he was adamant he hadn't stuck a hosepipe in the flue to get rid of a wasps nest and yet, amazingly, the gas valve was flooded with water. So, I suspect there's a factor here I'll never appreciate but if these things can fail onesidedly, it makes sense to just get a new one rather than cut his hands off to stop him fiddling. He did say he'd meant to swap bottles rather than let it run out but hadn't quite done it..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Oct 2023 2:04 pm
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2226
Hi,
have you tried swapping the pig tails (pipe from valve to cylinder) to see if there is a blockage in that.
our set up is similar to this ..
https://lpgjets.com/products/cavanga-2-cyl...gI5KvD_BwE
.Transit! 2019
Gone D3 HSE 2008
Another Porsche Cayenne 2022
Gone Porsche Cayenne 2020
Gone RRS HSE Dynamic 2016
Gone RRS HSE LUX 2011
Gone RRS HSE 2006
Gone D3 SE 2.7 2008
gone D2 Td5 1999
That's a lot of pain for which I'll get no thanks.
Local regulations appear to say it has to be solid copper tubes ... the flexi ones got replaced a couple of years ago by a different plumber than did the original install..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Oct 2023 7:44 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 672
Question.
If one hose is disconnected from a bottle but both valves are open does gas flow from the open hose?
Apart from the safety issue the reason why I ask is if not there must be some form of restrictor to stop the gas.
It could just be a shuttle to block the port but whatever it is it could be stuck.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
I've put it on a list of things to look at next time I visit ... which won't be for a while.
Probably just fit a new proper one sourced near there and know it will work and meet regs..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
