Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
ECU updates, do I need them?
I checked if any ECU's need updating yesterday, out of curiosity as only had the car a month, and had a few come back with updates available, would anyone know if these are recommended, or leave as is?
Assembly (F113) = Unknown -> 7H42-2C405-AF
Assembly (F112) = SRB500400 -> None
Hardware (F111) = NNN500810 = 7H42-14C227-AA = Up-to-date
Serial = 4506241WE0079
Strategy (F188) = NNV504670 = 7H42-14C036-AC -> 7H42-14C036-BAVolunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
If it's not broken don't fix it. If the car is running fine I would leave well alone.
Flack
12th Mar 2024 5:42 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
Cheers Flack, I usually agree , but I was wondering if anyone knew if the ones listed were worth doing and if they make any noticeable difference? I've only had it a month so want to play, as long as it doesn't it up.
It's free stuff at the end of the day. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
13th Mar 2024 2:36 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5043
There's a risk with updating as you could "brick" the car which is why the advice is to leave well enough alone.
If you decide to go ahead, read carefully the GAP IID instructions and understand them, as well as the risks before proceeding. Other than the MY07 IPC firmware update (clock on dash, three flash indicators) I'd leave it alone if you already have it! yµ (idµ - eAµ) ψ=mψ
13th Mar 2024 4:24 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6400
I have flashed a lot on D3/D4 never had any issuesproviding your battery is fully charged or you have good tool which can be used in supply mode like CTEK PRO25S or bigger.
G
13th Mar 2024 4:41 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
Thanks for the replies.
I was wondering if there is a guide/list of what the updates are, to see if they're worth doing?Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, but I was wondering if anyone knew if the ones listed were worth doing and if they make any noticeable difference? I've only had it a month so want to play, as long as it doesn't 
it up. 
