Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
Battery light still on after new alternator fitted
I had the battery light staying on and after recommendation, changed the alternator and battery as I was only getting 13V with it running.
I have fitted a recon DENSO unit and I cleared the fault with my IID tool, but the light came back on again a short while after starting.
The fault coming up is -
P0622-29 - Generator field terminal circuit
General signal failure - signal is invalid (2B)
Am I missing something else, or does the new alternator need a bit of time to get recognised?
Cheers for any help.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
14th Feb 2024 1:53 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10676
It does take a minute or so.
But if you continue to have problems, have a look at the engine ecu connectors behind the battery.
Make sure they are dry.
Check the 5A alt fuse in the fusebox if you haven't already.
14th Feb 2024 2:14 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
Cheers again Pete K, I've checked the fuse again, and all the connectors appear ok.
It's frustrating now, as I may have wasted time & money changing the battery and alternator (although I now know how to do another job on it )
I'm going to have a look through the wiring diagram to see where the cables run and see if I can find an issue. I'll probably check continuity between the alternator plug and fuse etc.. when I get time.
At least I know the parts are working and I'm actually getting the right voltage.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
14th Feb 2024 4:41 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
The battery light is still staying on regardless of how fully charged the battery is, so it's possibly the monitoring or control cables continuity to the ECM.
I haven't had a chance to check the wiring yet as had a lot of other things going on, but I was wondering if there are any voltage values on the 'alt con' and 'alt mon' for when I test? I'm obviously going to do continuity tests before anything else.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum