Are these the correct fitment for the D4 3.0TDv6 engine? They are supposed to be equivalent to LR013148, yet the internal diameter at 32mm is too small to go over the plastic centre on the oil filter housing.
I found this issue last night after changing oil and removing the old filter, which has a 38mm centre. Pictured below is a Bosch filter (right) that I had to fit instead and the supposed Mahler filter. You can see the size differences of the centres, but the filter body appears to be the same size.
Click image to enlarge
Interested to hear feedback, or what I am doing wrong!
Regards,
Steve
22nd May 2024 11:51 am
Davethegeo
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 913
I use that Mahle filter. It is a tight fit but does go on. I also use MANN-FILTER Oil Filter HU826X.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
Will it push over the plastic centre? The white part has some give, but I would be worried about damaging the plastic centre part. Mine already has a small split and probably needs replacing soon.
Regards,
Steve
22nd May 2024 12:17 pm
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
Just had exactly the same on my FFRR - didn't want to risk it and it was the most expensive from ECP; ordered genuine LR instead. Quite annoyed - make it the right flipping size!
22nd May 2024 12:54 pm
Davethegeo
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 913
SteveKK wrote:
Will it push over the plastic centre? The white part has some give, but I would be worried about damaging the plastic centre part. Mine already has a small split and probably needs replacing soon.
Yes it fits! The white plastic ends of the Mahle filter seem quite stretchy and have always fitted snugly over the hard plastic of the filter housing. I've never felt I had to force it.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
Last edited by Davethegeo on 22nd May 2024 1:33 pm. Edited 1 time in total
22nd May 2024 1:06 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5044
If you look closely at a genuine LR filter it will have Mahle written on it, or at least it did have. yµ (idµ - eAµ) ψ=mψ
22nd May 2024 1:16 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8227
I've just changed mine, I've always used Mahle, they will fit ok they just need pushing in. It can when others can't,
It will when others won't,
It goes where others don't.
22nd May 2024 5:33 pm
ClassikFan
Member Since: 02 Nov 2016
Location: Surrey
Posts: 1047
I've had wrong size Bosch filter sent to me for three different cars now, seems there is something wrong with their catalogue system. Seat BMW and LR.Just 'cause you got the power... that don't mean you got the right.
Thanks for the replies. I will try to force the Mahle filter on at my next change, which will be about 12 months. (This is my intermediate change between my annual Indy service.) I will probably look at getting a spare housing, as I do not think they are that expensive.
I could never remember if Mahle or Mann made the filters for Land Rover, so will try to remember that nugget of information.
Regards,
Steve
23rd May 2024 4:47 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5044
I neglected to specify in my above post that Mahle are the OEM for genuine LR oil filters for the 2.7 D3.
Mann are the genuine LR OEM for the D4 3.0 yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
