Member Since: 06 Mar 2017
Location: Lost
Posts: 4960
There no n/s/f wheel arch connections for the suspension on the D4. This was the original loom design on the early D3's which was later moved up behind the passenger headlight on D3's from MY 07> and on all D4's. yµ (idµ - eAµ) ψ=mψ
23rd Jun 2024 2:30 pm
alex0264
Member Since: 16 Apr 2012
Location: Taunton
Posts: 135
Thank you, that is alot easier to get to! Had a look and all appears to be fine, very clean as you can imagine as I suppose the headlamp unit keeps it protected.
Interestingly though after yesterday's activities taking the NSF inner arch out and removing the ants nest, I now have two faults logged, one for the NSF height sensor and one for the pressure sensor - 'Voltage out of range'. No warnings on the dash though, so I guess it must have been a brief blip. Interesting though that it should occur exactly when I was doing that.------------------------------------------------------------------------------------
2016 - D4 HSE Luxury Scotia Grey - Pending...
2014 - D4 HSE Indus Silver - A total mystery
2011 - D4 HSE Stornoway Grey - Legendary car
2006 - D3 HSE Buckingham Blue - Moneypit v1
23rd Jun 2024 6:59 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13928
gstuart wrote:
Hi mate
I found those working diagrams from here after someone else shared them
Indeed those connectors were as far as I’m aware from 2007 were moved to behind the head lights
I have been trying to find out where each wire goes for those 3 x connectors but is a bit of a minefield tracking them down one by one
Plus 1 to prof g ,
No probs as I know posts can easily be missed as I mentioned it the other day
Good that u at least removed the dirt and ants out before they got access to inside the cabin
24th Jun 2024 11:36 pm
alex0264
Member Since: 16 Apr 2012
Location: Taunton
Posts: 135
Apologies for not following up on this until now.
If someone reading has a GAP or equivalent tool, please would you be kind enough to bring up the live values for the pressure sensor supply voltage - should be around 4.7/4.8 volts, and take a screenshot then post it here. I have looked at so many things and I just cannot get more than 0.9 volts to that sensor.
Thanks------------------------------------------------------------------------------------
2016 - D4 HSE Luxury Scotia Grey - Pending...
2014 - D4 HSE Indus Silver - A total mystery
2011 - D4 HSE Stornoway Grey - Legendary car
2006 - D3 HSE Buckingham Blue - Moneypit v1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
