PilotCustard
Member Since: 16 Apr 2019
Location: Forth
Posts: 6
|
| Air Suspension Harness compatibility... [front-right corner] |
|
I'm getting a "Front right height sensor voltage" error [C1A69-1C]
I've replaced the sensor, and replaced the connector for the sensor, and I'm still getting the error.
Using a multi-meter, I've confirmed power at the sensor - which the wiring diagram says is 5V between pins 1 & 5
My next thought is an intermittent fault in the loom itself: the one from the body loom down to the front valve-body & the ride-height sensor.
The question is - is the one for the D4 & the early RR-Sport [which was essentially a D3, tweaked] the same?
I can find D4 ones on ebay, and they look the same..... but are they?
|
 24th Jun 2024 12:24 pm |
|
|
