Member Since: 21 Jun 2024
Location: Cheshire
Posts: 9
Crank Snapping Question
2005 2.7 TDV6, 144,000 miles. Is there a danger zone for this to happen or like a threshold?
27th Jun 2024 8:20 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753
I thought the D3 2.7 had a bigger chance of having a catastrophic oil pump failure for certain model years and the D4 3.0 had a bigger chance of snapping the crank. I doubt anyone can state the probability with any kind of statistical significance.
27th Jun 2024 8:46 pm
Majik
Member Since: 21 Jun 2024
Location: Cheshire
Posts: 9
First time owner and bought as a project. Didn't really know much so that's more info. Always fancied a disco and heard they were problematic but fancied learning a bit and getting my hands dirty. Any info is good info.
27th Jun 2024 9:13 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14389
Welcome to the mad house.
Check when the belts etc were changed and that the oil pump is the upgraded version.
If in doubt change all. New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
27th Jun 2024 9:26 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73082
I may be wrong (it has been known, it was a Tuesday and raining) but D3 engines go pop from spun bearings rather than cranks snapping. Been there, got the oily t-shirt.
28th Jun 2024 12:31 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5043
Oil pump change at (or every) 100k miles and move oil grade to 5w/40 with oil change every 6k miles.
New cam chains and tensioners at 150k miles and again at 300k.
If you can last that long. yµ (idµ - eAµ) ψ=mψ
28th Jun 2024 12:39 am
Majik
Member Since: 21 Jun 2024
Location: Cheshire
Posts: 9
Thanks for the heads up on the oil pump, belts etc. Is the haynes manual worth it? Or is there a better reference source?
28th Jun 2024 9:29 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14389
Have a search for the D3 engine rebuild.New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
28th Jun 2024 11:38 am
Majik
Member Since: 21 Jun 2024
Location: Cheshire
Posts: 9
Is there any early warning signs for spun bearing or fault codes to watch out for?
29th Jun 2024 5:50 am
A.J.M
Member Since: 31 Oct 2009
Location: Carluke
Posts: 2847
Not really.
If it’s going to snap a crank then it will snap.
If it’s going to spin a bearing, it’s going to spin it.
Is there any early warning signs for spun bearing or fault codes to watch out for?
Despite regular (5000 miles) Oil changes, Cambelt etc. including Oil and water pump replacement 12K miles previously, my 2008, TDV6, HSE decided to throw a conrod through the block without warning on the M40 on a wet Sunday night after driving through France for 350 miles to the Midlands in the UK. Was doing around 70 mph and the engine just cut out with the warning lights on the dash lit up like a Christmas tree. Coasted on to the hard shoulder and had it recovered 3 hours later to my destination. The garage posted me a photo later showing a hole in the side of the block with just the small end of the conrod-minus the piston poking through. A quick Post Mortem showed no Oil Pump or Cambelt problems with everything in place and intact, including the Crankshaft.
Many, many years ago, I had an Austin A35 which developed a knock and horrible rattle in Shrewsbury, I drove it home to Birmingham (50 miles), took the engine out, removed the sump and found that the crank had broke on an angle at the web on no. 1 big end. Main bearings were not too bad so got a reground crank and bearings, gave the engine a good clean out and the car did over 30K miles when I sold it and was still on the road for a few years later.Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
29th Jun 2024 6:13 pm
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 428
Majik wrote:
Is there any early warning signs for spun bearing or fault codes to watch out for?
Unfortunalty no.
Oil changed every 4k had no issues at all, pulled onto dual carrigeway went to accelrate away and lost all power no noise no warning lights.
The result
Click image to enlarge
M6NIO
29th Jun 2024 6:48 pm
Majik
Member Since: 21 Jun 2024
Location: Cheshire
Posts: 9
Reading from various articles I can find plenty of horror stories and discussions on this topic. The only stats I can find was on the website "https://www.4x4community.co.za/forum/showthread.php/248591-Preliminary-Investigation-into-TDV6-Crank-Failures"
Where the stats say : "engine failure rate of LR as reported by Warranty direct in the UK is 1 in 77 which is better than both BMW and Audi."
Due to this I wonder if the issue is as prevalent as it seems or its publicity due to the severity has amplified the occurance.
The site also references polls on this forum.
What is the general feeling on odds of failure from more experienced owners?
30th Jun 2024 10:41 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73082
Majik wrote:
Is there any early warning signs for spun bearing or fault codes to watch out for?
Absolutely none for mine. I had just pulled away from a junction in NW Norway, made the mistake of thinking “she’s running the best she ever has” and a couple of km later heard flap-flap-flap noise from the front like trim coming off. All the rest is history and she was scrapped a couple of thousand miles from home.
No warning lights, no change in driving, not even fault codes, just the flapping noise, then the engine sounding like a bag of spanners. Then she was history. Shame as my trusty D3 had taken me on many adventures, in 20 countries on 2 continents, it was an emotional wrench but even on her last drive she’d looked after me and got me to a safe lay-by to wait on the recovery truck.
Best advice is don’t worry about the odds, just enjoy the car. But make sure you have breakdown cover, wherever you are.
30th Jun 2024 12:11 pm
DN D3 Decade
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2344
Mines fine, it’s only had 3 engines in 101,000 miles
Just kidding.D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
