Member Since: 07 Oct 2018
Location: Abergavenny
Posts: 63
Programming of replaced EPB module? Eh??
I have seen many videos about EPB repair and replacement but this is the first I have come across that says its essential to get a replaced EPM programmed. Its a Britpart video and its at 5:56.
He says it so it must be true?? But how and why? And whats the effect of not programming?
Cheers
Crris
20th Jul 2024 10:25 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
You have to tell the EPB if it's a manual or auto gearbox. Otherwise it could be looking for clutch position or not for auto release on hill starts and all that stuff.
I would have thought a GAP could do it.
20th Jul 2024 11:27 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5040
Re: Programming of replaced EPB module? Eh??
oldandslow1 wrote:
I have seen many videos about EPB repair and replacement but this is the first I have come across that says its essential to get a replaced EPM programmed. Its a Britpart video and its at 5:56.
He says it so it must be true?? But how and why? And whats the effect of not programming?
Cheers
Crris
They are VIN locked so it needs coding when fitted to the car as well as calibrating which can be done with GAP.yµ (idµ - eAµ) ψ=mψ
20th Jul 2024 12:25 pm
oldandslow1
Member Since: 07 Oct 2018
Location: Abergavenny
Posts: 63
Thanks for your quick responses.
As I have been using a borrowed second hand unit to fault find my own EPB do you think this could explain why I am getting seemingly illogical actions of the EPB motor and a constant red flashing light?
And to change VIN and tell it my car is an auto is that via the IID ECU flash functions (gulp)?
20th Jul 2024 12:39 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5040
Flashing light is a signal it's not calibrated or coded to the car. It might work with just a calibration but there will be a permanent fault code and possibly red flashing light re the coding.yµ (idµ - eAµ) ψ=mψ
20th Jul 2024 12:44 pm
oldandslow1
Member Since: 07 Oct 2018
Location: Abergavenny
Posts: 63
Ahhhh right thank you
21st Jul 2024 12:46 pm
urhunden
Member Since: 15 Jan 2010
Location: Stockholm
Posts: 813
According to GAP they are not VIN coded.
What about programming and calibration? The Britpart video does not say anything on how to do it. And the GAP is not more informative.
Any help out there?Discovery 4, MY2011, TDV6 Auto
Discovery 4, MY2013, SDV6 Auto
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
