Member Since: 29 Jul 2024
Location: Merseyside
Posts: 1
Possible LPFP failure?
Morning all.
I’m experiencing an intermittent issue with my D3 (2.7) that seems to be getting more frequent.
Every so often I get the “transmission fault, limited gears available” and it drops into limp mode. No dash lights at all. Restart the engine and it’s fine.
On a scan, I’m getting 3 fault codes.
P2290-00 - injector control pressure too low
P0101-17 - mass or volume air flow. circuit range/ performance.
Р0191-23 - fuel rail pressure sensor range/ performance.
The only transmission code I’m getting is
U2023-86 - fault received from external node.
I’m thinking maybe fuel filter or LPFP?
Does anyone have any ideas? Any help would be greatly appreciated!
29th Jul 2024 10:39 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
Start with a new OEM fuel filter replacement and see if things improve, if not it's time to get testing the current consumption and output of the LPFP.
There are reams of posts written on this subject over many years and the test procedures are covered as well. yµ (idµ - eAµ) ψ=mψ
29th Jul 2024 11:46 am
zig
Member Since: 09 Sep 2005
Location: Scotland
Posts: 648
I would support fitment of a new OEM fuel filter as the first step.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
