Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Fuel Leak off pipe issue
Post Reply  Down to end
Page 1 of 1
ostosix
 


Member Since: 19 Mar 2017
Location: Lincoln
Posts: 324

United Kingdom 2005 Discovery 3 TDV6 SE Auto Tonga GreenDiscovery 3
Fuel Leak off pipe issue

Hi Folks, i wonder if anyone could help.
D3 190k 54 plate,
Since changing the fuel filter after engine had cut out a few times which solved that issue. but seems to have uncovered another issue.

I first had a burst leak off pipe assembly and replaced it. Now the leak off pipe seems to be fuel getting into the temp sensor through its sealant and raising a code, the connection pins are awash with fuel. Thats sensor showing registers -41 degrees when the fault occurs and put me in limp mode. Mopping fuel out lets me clear code and drives normal again. 10-15 miles later happens again. I have slaved in the old sensor and now temp appears normal (55-65degrees)on IID live page. This allows me to drive normal.

I’ve checked the fuel filter connections are correct. And blew through the connection from leak off pipe through fuel cooler down to filter to ensure nothing blocked. There is still an issue which says to me there is an excess of pressure getting into the leak off line. Would an injector bypassing heavily raise the pressure that a sensor would fail? Would a genuine LR pipe be a better option(£163), current one is LR Trade parts(£49) on ebay

Any pointers would be great and welcome.
  
Post #237555320th Aug 2024 10:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10684

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Kits like this do exist so you can see if one injector is leaking a lot

https://www.ebay.co.uk/itm/305696752029?mk...media=COPY

Or you could put the pipe by the sensor into a jar , so you can try and determine if it’s over pressure.
Maybe the injector that blew its pipe off is at fault


If you’re careful and use a hair dryer you could heat the pipes by the Y join and disconnect and compare the fuel coming out the left side to the right.
It’s highly likely to result in something breaking though and your car off the road for a few days while you order new pipe
  
Post #237556121st Aug 2024 5:30 am
View user's profile Send private message View poster's gallery Reply with quote
ostosix
 


Member Since: 19 Mar 2017
Location: Lincoln
Posts: 324

United Kingdom 2005 Discovery 3 TDV6 SE Auto Tonga GreenDiscovery 3

Yeah i think next port of call is a leak off test. I have the old pipe so can make up something with the correct fitting.

The truck is now running great aside from that small sensor issue.

Thanks Pete
  
Post #237561721st Aug 2024 5:48 pm
View user's profile Send private message View poster's gallery Reply with quote
LR3norway
 


Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196

Norway 

Hello. Having similar problems, like many others it seems.
What do you mean with slaved the old sensor?
What temperature reading are you having when engine is cold? Should diesel temperature be as high as 50-60degrees? Just wondering since this is the reading I got when disconnecting the temp sensor (open circuit)
  
Post #237571322nd Aug 2024 3:29 pm
View user's profile Send private message View poster's gallery Reply with quote
ostosix
 


Member Since: 19 Mar 2017
Location: Lincoln
Posts: 324

United Kingdom 2005 Discovery 3 TDV6 SE Auto Tonga GreenDiscovery 3

Hi Sorry been away.
The old sensor cut off the pipe and plugged into the red connector. Temp gets as high as 99 today which id guess it temp of fuel rail anyway, whole things incredibly hot. Drove well towing until i had to really put foot down as a big artic truck wouldn’t make room for me. Shortly after heard a clicking noise and some smoke so misfiring somewhere, but engine seemed to sort itself out. But later in the service station it wouldnt catch when i restarted the engine so needed easy start spray. i think air in pipework or injector in bad shape
Click image to enlarge



I presume its all the same fault.
  
Post #237593426th Aug 2024 5:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10684

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

It says injector leaking.

Interesting. Maybe into the cylinder or into leak off pipe
  
Post #237593726th Aug 2024 5:43 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site