Member Since: 23 Sep 2024
Location: Berkshire
Posts: 106
Oil filter housing / oil cooler leak
I'm going to have lots of questions, new owner here, a whole week into Disco ownership so far ! I'm going over it sorting as much as I can before the weather gets rubbish. Oil change today and I noticed lots of oil in the vee of the engine, and a trail down the back of the engine. This is the oil filter housing / oil cooler, right ? Do I definitely need a new unit, or just the seal ? I can see you can buy the seals/gaskets on their own ?
Click image to enlarge
Click image to enlarge
29th Sep 2024 7:11 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6403
Most likely you or whoever did oil change damaged oring around oil filter housing which is common.
Take out the unit check the o-ring if not damaged (i doubt) might also be that housing not been torqued correct upon installation?
G
30th Sep 2024 6:44 am
Sundayjumper
Member Since: 23 Sep 2024
Location: Berkshire
Posts: 106
Nope, not me, I've only had it a week, I'm going over it fixing the stuff that's been bodged by the "specialists" that were paid to maintain the "full service history" The o-ring was fine and the filter housing needs very little torque to seal it. I've found several threads relating to the housing/oil cooler joint leaking though.
FWIW, it was serviced by a specialist last Dec and had only done 1,412 miles by last weekend, this is the air filter I took out on Saturday:
That is NOT 1,400 miles of dirt, and you'll notice the filter is date stamped 2017 Why would you not change it at every service ??? This is why I do all the work myself. I don't trust other people.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
The o-ring was fine and the filter housing needs very little torque to seal it. I've found several threads relating to the housing/oil cooler joint leaking though.
Why would you not change it at every service ??? This is why I do all the work myself. I don't trust other people.
