Member Since: 06 Oct 2024
Location: Orkney
Posts: 2
Discovery 3 air suspension fault
Click image to enlarge
Hi everyone... I hope someone could help please. I have a 2007 Discovery 3 2.7 tdv6 that's only done 125,000 miles. Recently, I have just put replacement Hitachi style compressor on, as the AMK one that had been fitted, stopped working.
Having put the new Hitachi style compressor on, it is working fine, but, the suspension is not raising and there isn't any warnings on the dash. The compressor comes on for around 2 or 3 minutes then switches of for around 7 minutes, then comes on again. I have noticed that the suspension height switch in the centre console is lit up ok, but it won't let me change the height. The suspension is on it's bump stops and won't attempt to raise. My diagnostic tool, which is a Icarsoft V3 for Land Rovers.. is coming up with U0416- 94 ( Invalid data received from vehicle dynamics control module) It is also coming up with items that are in the photo... thank you so much, for any help given.... by the way, the fuses are all good..
Click image to enlarge
6th Oct 2024 4:13 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 401
The car system settings need to identify the correct compressor, so I wonder if it is an issued with you replacing an AMK with a Hitachi? Can your Icarsoft make the necessary changes?Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
7th Oct 2024 8:32 am
Mizzymokes01
Member Since: 06 Oct 2024
Location: Orkney
Posts: 2
No it cannot... but I try it with an Autel computer... thank you, I'll try it...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
