Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > IIDTool Help

Unable to read module faults
Post Reply  Down to end
Page 1 of 1
rowlejohn
 


Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259

France 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3
Unable to read module faults

Trying my GAPII BT out today for the first time, I tried to access various modules and got Fault codes and they were not available.

Read ccf Backup-Operation failed Code E0

SAS- Operation failed Code E3
Park Brake-Operation failed Code E3
RLM- Operation failed Code E3

The tool has the latest version software and has identified one fault which I am aware of and have a replacement to fit.
B1D97-492F Tilt Sensor internal failure

Are the above "E Codes" generic or specific to the GAP ?

Another question-how do you guys take a "Screenshot" of the GAP page on your iPhones/iPads and save it ?
 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1 
 
Post #238054729th Oct 2024 5:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10734

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

If all those models are on the same can bus e.g. mscan hscan
Then poor contacts on the diagnostic plug.

Screen shot by pressing 2 buttons on phone.
Hold Right and press left top I think ?
  
Post #238055729th Oct 2024 6:37 pm
View user's profile Send private message View poster's gallery Reply with quote
rowlejohn
 


Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259

France 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Thanks for the fast reply Pete-appreciated Thumbs Up
I'll start by giving the OBD socket a good clean first but I remember cleaning it when I took the complete dash & console out earlier in the year to replace the upper dash which had cracked in the sun. Have visitors here this week so will try a quick clean with switch cleaner first and if that fails will delve deeper with the multimeter.
Will update with progress.

Does anyone use a Windows laptop with USB lead or Bluetoth connection to the GAPIIBT- would be handy for printing readouts etc ?
Bow down
 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1 
 
Post #238056129th Oct 2024 7:45 pm
View user's profile Send private message View poster's gallery Reply with quote
rowlejohn
 


Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259

France 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

I've just ordered a new OBD2 connector, prewired, just in case it turns out that the one on the car is dodgy for £8 Idea
 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1 
 
Post #238056629th Oct 2024 8:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10734

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

It’s usually pin size problems rather than dirt.
An obd extension maybe an idea.

USB cable is mainly for updating the tool
  
Post #238057029th Oct 2024 9:16 pm
View user's profile Send private message View poster's gallery Reply with quote
rowlejohn
 


Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259

France 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

My Mongoose (JLR SDD) OBD adaptor/Interface works fine but maybe the pins may be slightly larger but it's difficult to measure the exact pin sizes given the shroud on the plug body.
I have a spare male OBD2 extension lead that I could adapt initially by wiring the socket I have ordered to it to check continuity.
Thanks for your suggestion-I hadn't thought of that Idea Laughing Bow down
 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1 
 
Post #238057429th Oct 2024 9:55 pm
View user's profile Send private message View poster's gallery Reply with quote
rowlejohn
 


Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259

France 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Sent GAP support an email outlining the codes etc and he suggests doing a hard reset and trying the tool out again. I will do that tomorrow and update GAP and here.
 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1 
 
Post #238064130th Oct 2024 3:22 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site