Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
25th May 2008 7:16 pm
drivesafe
Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867
Hi folks, here is some info about the new SC80-LR Plug-&-Play + LR-FPC ( Full Power Cable ) kit.
This new kit is not on my web site yet and is a more cost effective alternative to buying and installing both the LR-HCE and TPSE kits.
The kit has everything in it to be able to run battery charging cable to the rear of a D3, to charge an auxiliary battery in a caravan, camper trailer or float and comes with an additional 50 amp Anderson plug to make the connection between the D3 and tow vehicle.
The kit also has everything needed to install two 16 amp cigarette light type power sockets in the rear cargo area.
All the cabling in the engine bay has already been pre assembled to make the engine bay section of the installation very quick, simple and easy.
The installation instructions are supplied on a CD that describes everything needed to set up the engine bay and how to run the cable through the D3, including info on how to remove what panels and has a large number of pictures to make the installation as painless as possible.
The kit has addition components supplied with it to allow the second Anderson plug, if not required to be used on a tow vehicle, can be installed under the bonnet to supply a high current connection for an air compressor or what ever.
The diagram below will give you an idea of what the FPC kit can do and the kit has everything needed to carryout a safe and complete professional style installation. All you need are some basic tools and some electrical tape.
Click image to enlarge
2008 TDV8 RR Lux + 2009 D4 2.7
25th May 2008 10:10 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
25th May 2008 11:44 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
I've received the money from all the people ticked above & will update the others as they come through the bank.
The only person I haven't heard from is Bornslippy. But being a bank holiday weekend, I'm sure he's out sailing (lucky !)
I'll be processing the order today, but may need to update with any last minute stragglers (no guarantee though, but I will try)
Thanks for all your commitments, will map out where people are & once sorted, will post up in the D3 courier service requests. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th May 2008 9:44 am
gilmore
Member Since: 16 Jan 2005
Location: On the sofa
Posts: 2185
Ent phoned back. He says Wiggs is sorting out the payment on his behalf. He's happy to wait until Billing for delivery.
cheers
robAll opinions expressed in this posting are my own and are not necessarily those of someone who knows what they are talking about.
Land Rover Defender V8, 50th Anniversary Edition
Mercedes ML350CDI
HM Moto CRE300X
Honda CRF250X
1974 Honda CB750K4
1975 Honda CB750K5
Ford Transit Custom (for the bikes)
26th May 2008 11:25 am
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
Hi Ian, sorry did not get time to sort out payment Thurs night, am back from travels, will read PM & sort out payment shortly, let us know if anything works out for pub meet distribution...Disco3 is now gone but not forgotten. Waiting for Disco6 with full aluminium construction weight reduction and hybrid engine...
26th May 2008 12:04 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
gilmore wrote:
Ent phoned back. He says Wiggs is sorting out the payment on his behalf. He's happy to wait until Billing for delivery.
cheers
rob
I have paid it for him ..lets hope he comes home from his holiday !!!G4 Gone ...but not forgotten
26th May 2008 12:36 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
You all better hope I come back from mine!!!! (I wished!)
Righto, so all payments sorted one way or another. Anyone get hold of bornslippy, he might just sneak in Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th May 2008 12:37 pm
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
wiggs wrote:
gilmore wrote:
Ent phoned back. He says Wiggs is sorting out the payment on his behalf. He's happy to wait until Billing for delivery.
cheers
rob
I have paid it for him ..lets hope he comes home from his holiday !!!
Don't forget to charge him interest Disco3 is now gone but not forgotten. Waiting for Disco6 with full aluminium construction weight reduction and hybrid engine...
26th May 2008 2:30 pm
Bornslippy
Member Since: 18 Dec 2007
Location: Southampton
Posts: 68
ooops, a bit behind but caught up now...
Yes I was at sea, motoring in the RIB this time rather than yotting...
Very Black 07 HSE. Sometimes with added mud. Sometimes towing a boat. Always grinning.
27th May 2008 8:28 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
27th May 2008 8:34 am
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
Bornslippy wrote:
ooops, a bit behind but caught up now...
Yes I was at sea, motoring in the RIB this time rather than yotting...
Does the RIB have split charge? Go on, you know you want too!Disco3 is now gone but not forgotten. Waiting for Disco6 with full aluminium construction weight reduction and hybrid engine...
27th May 2008 10:26 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
D3 Courier Service Required...
OK, so we've done the easy bit, now we need to sort out the logistics....
TFC has all the batteries & will be going to Ken's next Monday, potentially to drop off some of the southern batteries.
Nick has the clamps & can take to the Yeovil Area Meet next Tuesday. Is anyone from the Yeovil Meet, going north or meeting up with TFC later next week?
Gilmore will collect battery from TFC for myself & hopefully will pick up some of the Traxide Units from me
Meets that I know of for potential swap over (depending on receipt date for Traxide units)
3rd June - Yeovil Meet (for Clamps from Nick)
7th June - Me and Gilmor fitting (hopefully) traxide units & Battery
8th June - Tong
9th June Northern Meet
24th June Southern Meet
SOOOOO, Who can help & who's going to which meeting so we can try to get this sorted for everyone
They've just called my plane, so could I ask someone to post this in the relevant meet sections and also in the D3 courier services section....
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
29th May 2008 6:20 pm
gilmore
Member Since: 16 Jan 2005
Location: On the sofa
Posts: 2185
I will be going to the Billing (19th/20th July) and Salisbury (2nd/3rd August) Disco3 events so can deliver stuff to any people who will be there. Ent's going to Billing and I'm giving him his stuff there.
Alternatively I live near Nottingham so anyone in my neck of the woods can get their gear from my place after 7th June.
Anyone want to take up any of these options?
cheers
robAll opinions expressed in this posting are my own and are not necessarily those of someone who knows what they are talking about.
Land Rover Defender V8, 50th Anniversary Edition
Mercedes ML350CDI
HM Moto CRE300X
Honda CRF250X
1974 Honda CB750K4
1975 Honda CB750K5
Ford Transit Custom (for the bikes)
29th May 2008 6:46 pm
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
I was supposed to be in Yeovil this week, but the meeting got canned, should be in that area second week in June so worst case I could collect the thames valley clamps then...
Also if nothing works out I could come north to get the battery, although if they can get any further south than you Ian that would help!
EDIT: Also not going to be at Billing, as wife booked summer holiday that weekend before I realised, doh.Disco3 is now gone but not forgotten. Waiting for Disco6 with full aluminium construction weight reduction and hybrid engine...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, you have a PM (If you're quick! 
)
..lets hope he comes home from his holiday !!!
(I wished!)
